Search results for query: *

We have two cisco PIX 520 16M FLASH IOS 6.3(4) on both and 2 FE interfaces on each firewall. (Identical PIXes) The first PIX CONFIG is: nameif ethernet0 outside security0 nameif ethernet1 inside security100 ...... access-list 101 permit ip 192.168.XXX.0 255.255.255.0 192.168.AAA.0...

We have two cisco PIX 520 16M FLASH IOS 6.3(4) on both and 2 FE interfaces on each firewall. (Identical PIXes) The first PIX CONFIG is: nameif ethernet0 outside security0 nameif ethernet1 inside security100 ...... access-list 101 permit ip 192.168.XXX.0 255.255.255.0 192.168.AAA.0...

Can you also provide bin file name for 12.3 version thanks

Thanks Cobac Can you please post your configuration.

No cobac seems like forum sleeping problem not solved yet.

On some of my internal machines requires a access to this ip address(203.13.163.xxx) in particular port access 4569 for IAX. Thanks

Thanks Problem Solved

static (inside,outside) 203.105.78.xxx 192.168.1.110 22 netmask 255.255.255.255 0 0 access-list inbound permit tcp any any eq 22 access-group inbound in interface outside Thanks

Bit confused in following this can you please clear my doubts: Outside IP: YOu mean Pix Outside IP or the oustside IP of the PC from where im accessing? host xyz host : ? Thanks

Presently how may tunnels are up and running?

I would like to access my PC from xyz location. How do i open port 22 to access my pc. I am using pix 501. Can anyone provide the commands to open the port so that i can access my pc. Thanks

Dont know, As PNDSCm said i have formatted the pc. Is that any problem if dns is running on CCM? Thanks

Hi Ginka Let start from beginning and step by step =========================================================== VPN: Virtual private network IP : Internet Protocol(Two Types of IP Private IP and Public IP) =========================================================== 1. If you have two computers...

Please dont be upset. I learnt lots of things from you and other tek-tips members. No need to oplogise.Have a good day

I did but still same problem. From my mobile i am ringing on pstn number when iring on number i can hear bell ring once then engage tone on my mobile. When i press 9 i am getting dial tone on IP Phone after dial tone when i dial the number it not dialling. Thanks

Its not a dead issue, i am not trying to make a production system out of it. =========================================================== Jerake75 here are the details I appreciate your assistance i am still curious to know what actually was the reason for getting automatically stopping CCM...

I have same problem given below are the details 1. Non-standard hardware non-Cisco approved)? 2. 4.0.1 3. Windows 2000 Advance Server 4. Exchange 2000 5. Voicemail Only configuration 6. New this a new install Thanks

thanks for the reply "h323-gateway voip bind srcaddr 10.200.135.249" Is 10.200.135.249 is the IP address of CCM?

Yes I tried my best it starting but after few second automatically stopping and IPPhones is keep on displaying registering............ Eventually i spent 9 hours, formatted the pc and reinstalled the CCM4.1.2 now all the phones are registered working back on h.323...

Unable to make and receive calls