Search results for query: *

Yes, but it is a licenced feature. As the Samsung systems have now gone end of support, you won't be able to get any licences. If there are no licences already in place, the only option would be to upgrade the system to version 5.0.3 and then activate the tutorial licence as this enables everything.

The Gamma issue isn't just causing issues with Avaya kit either, we've had some systems by a completely different manufacturer that we've had to reconfigure the way the SIP works in order to get things working again. PITA is right.

ELG iPECS UCP is worth a look

It sounds as though not all the RTP ports have been opened on the router/firewall. I'd ask them to check that they have the 7000, 7100 & 7300 port ranges open.

deberá crear un inicio de sesión, pero debería poder obtenerlo desde aquí. https://btsp.samsunggsbn.com/b2t/main.do

It may be an issue with the switch

There is nothing to install in regard to accessing the system, it's purely browser based. the default User name is admin and the default password 1234 for new systems, or at least they are the defaults in English, they may be different if the system is set for a different location. I have had...

Have you tried Firefox?, it's the only browser that will work for me.

I vaguely remember hearing about logging in to the SVMi using mugwumps as the password I think. It may be worth a try.

Has anyone else come across this, or found a solution?. I can now only use Firefox to program systems with as anything Chromium based immediately logs me out. It used to work, but stopped a couple of years ago and it's never worked since.

Do you get your hands on version 5.03 software for the Officeserv?. If you can, you can enable all the licences by activating the temporary licence and it shows as lasting for over 7 years. Also, I haven't noticed the timer counting down, so it may be longer.

Unplug the 7200 from the network and reboot the system, if it still has the same LEDs flashing when disconnected, it's a system problem. Duplicate IP addresses can cause the system to do strange things.

I believe the default password is #PBX1357sec.com and you have to change it once you've logged in.

Anybody know if a PDQ will work on an analogue line which has a divert set on it at exchange level? Cheers!

If you keep the * key held down when the phone is rebooting, do you get an option to go into the menus?

Thanks for the replies, DaIPOTek's suggestion worked. After an upgrade, a SIP extension won't register with the system IP address as it did previously.

I'll give it a go. Thank You

Just wondering if there was anything extra that needs to be added. The customer had a working SIP door phone (2n IP Force), so the system had licences, was configured etc. As I rarely touch IPO anymore, we got a 3rd party to do an upgrade from version 8.1 to 11.0. A while later, the customer...

I don't know about the site this is on, but OWA is what you want. https://ipecs-owa.software.informer.com/

Are you passing through the caller's CLI, if that is being sent back out, it may be the trunks are seeing it as an invalid/illegal call attempt.