iPecs eMG80 - Web access blocked

[Davide G.]

Hello everyone,
I am having problems on two machines which I can no longer access the configuration via the Web: pointing to the IP address of the switchboard, the request for login and password appears but when filling in the fields everything remains blocked and there is no more possibility of access to programming.

Thanks for your help.

 

[OldAndKnackered]

Have you tried Firefox?, it's the only browser that will work for me.

 

[Davide G.]

Thanks for your kind response.
I was able to work on the machines correctly, probably due to an electrical blackout this problem arose.

In my opinion the internal web server is blocked but even carrying out a reset nothing changes, while I can access the console via RS-232.
In the attached image you can see the problem in detail.
Is it possible to reinstall the software?

 

[OldAndKnackered]

There is nothing to install in regard to accessing the system, it's purely browser based. the default User name is admin and the default password 1234 for new systems, or at least they are the defaults in English, they may be different if the system is set for a different location. I have had issues where I log on to a system and I get immediately logged out if I use anything except Firefox, but I haven't come across a situation where the username and password can't be entered.

 

[Davide G.]

Even entering the default credentials and clicking on the blue bar does not log in.
I posted the image to highlight that in the login page for example, it is no longer possible to access the user guide and on the blue bar there is no sign login.
For this I feel that the internal web server is not working properly.
My question was whether it is possible to reinstall the full firmware by formatting the PBX or to upgrade the version. Excuse my English and I hope I was able to explain.

Davide

 

[OldAndKnackered]

It may be an issue with the switch