Search results for query: *

tried that, off and on, still not working

you need to add the user-profile via ASA or choose 18 or 19 depending of your needs then you need to go via web and on administrator accounts first you need to add the new profile select add new group and type prof20 (if you create user-profile 20) then for PID change 10000 to 10020 after that...

can you please paste the settings you are using for your val manager? also what version of CM you have Im using the main server ip-address port 5023 remove checkmark on ssh, sftp and scp and give it a try

if you have 40mbs I dont think theres a problem to use G711 at all, plus using G711 you are saving medpro resources if 125 its your total calls at the same time this mean that using G711/10ms/80samples you are using 96k per call, now 96k*125 agents its 11875kb, so you have like 28Mb free of BW...

Wrong Set Type CAUSE: The PBX does not recognize the set type. RESOLUTION: Ensure the PBX is properly administered to expect the appropriate telephone for the IP Address and extension.

I'm having problems to add a remote port network ipsi its showing as out of service service health 0.1.1.0 this is what I have s8720 CM 4.0 control a its under 10.10.2.0/24 control b its under 10.10.3.0/24 corporate its 172.16.235.0/24 remote port network on 10.10.5.0/24 CNC its on nothing...

cnc on is not supported by the version he have

yeah it is autonegotiaton disable and full duplex

Ok, port is not blocked and routing is setup, traffic to remote media gateway is thru control network a

I think the port 5010 is blocked in the network, thats the one the server uses to connect to the Ipsi, already added the static routes and I am still having the same problem

I dont know how to add a static route is that on the web interface or on SAT

Already check the TDM cable, everything fine I dont have a static route under configure server in the maintenance webpage and I have the ipsi adaptor in the back and the ethernet is connected to it I can ping the server, I can ping the gateway on port network A the ETR led is red already...

and what about cisco configurations that needs to be done, any Idea?

I am unable to add a new remote G650 port network I configure ipsi with ip add 172.16.12.12 for 4a and 172.16.12.13 for 4b subnet 255.255.255.0 and gateway 172.16.12.1 which is the router when I do a list ipserv get serv state out and state of health 0.1.1.0 already check cables, change...

yeah they all are manually addressed, :( I think I will have to change them all

Hi, we are about to take our main router down and have a different route for Voice traffic we wil loss phone connectivity unless we manually setup the new router ip on all of the 46xx phones is there a way to avoid doing this manually? the old router ip address is 192.168.3.1 and the new one...

I need to install a new Modem Server for VPN but I have no idea how to start and or any brand of Modem Server they want to dial up into the company network for VPN Purposes anything let me know thanks