Phase 2 then the settings for the Juniper routing of the phone connection with the CM are not correct.
Phase 1 is the construction of the tunnel
Phase 2 is device authentication alert by tunnel
My File :
ET NVIKEDHGRP 2
SET NVIKEID "GroupVPN"
SET NVIKEIDTYPE 2
SET NVIKEOVERTCP 0
SET...
Dear Friends
I have a problem contact the store that I am not able to find out why the problem.
The system is installed on a Windows Server 2008 64bit where are the Voice Mail 7.0.23, the IPO is in version 7.0.23 latest version available on the Avaya.
The problem is that in the logs folder for...
tlpeter
In this scenario tested the Manager is in operation, that is, he is playing the TFTP server, monitoring of Log Manager appears in the TFTP request coming from the central to the download but this does not happen, remember that the way that this mounted the scenario described above was...
In Monitor software of the following message:
99198208mS TFTP: (2606) 192.168.42.2(SrcPort 32081) TFTPReader: Fail: HoldMusic.wav (Code = 1) 899198208mS TFTP: (2606) 192.168.42.2(SrcPort 32081) ~TFTPReader: HoldMusic.wav
whenever there is trying to load music on hold
Friends,
Tests were performed:
I turned off the firewall in my computer and plugged straight into the IPO LAN2 port with an IP range 192.168.43.xxx and did not load the music on hold
I changed the IP to IPO 192.168.42.1/24 and 192.168.42.2/24 connected to my computer directly into the LAN1...
Friend,
The computer firewall is off.
The IP of computer is 192.168.26.182 and the IP of IPO is 192.168.26.180.
tftp log appears only in a download request from IP to IPO and nothing more.
I connected directly to my computer on port LAN2 set up a network and to upload the file from my...
Gentlemen,
I can not make the music hold to be loaded for the IPO. the file is in the correct format according to the manual.
In Monitor software of the following message:
99198208mS TFTP: (2606) 192.168.42.2(SrcPort 32081) TFTPReader: Fail: HoldMusic.wav (Code = 1)
899198208mS TFTP: (2606)...
Dear Friends, I am having problems with the IPO500 version 4.2 (23), I hope someone can help me. I have an IPO linked with cellular interfaces, but these off after the User, the logs are trapped in the System Status appears as if they continued to be used for hours, days ... only disconnecting...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.