Search results for query: *

Hi Gents, First of all, sorry for the delayed reply. 0 is configured as ATDN in ATT_DATA. If i configure 0 as scr key in 3904 it works. But we need 0 to be ATDN only. when i call 0 from any extn for ex. 608040, the extn 180000 rings and the display in 180000 extn shows only...

Here we go.. DES DIGITA TN 005 0 00 00 TYPE 3904 CDEN 8D CUST 0 DBA 1 FDN TGAR 1 LDN NO NCOS 7 SGRP 0 RNPG 0 SCI 0 SSU LNRS 16 XLST SCPW SFLT NO CAC_MFC 0 CLS...

Hi Guys, This is the Scenario.. ATDN : 0 No 2250 configured NIT_DATA NIT1 - 180000 (3904 phone) When any extn calls 0 (operator) extn 180000 receives the call, number is displayed but there is no name display and if 180000 is called directly then both name and number are...

Thank you for the information. I do understand that 2250 - operator console cannot be restricted. Eventually we did a work around to do something with the pretranslation table. The console takes the XLST 1 by default.

Hi Can anyone help me in blocking the long distance and IDD calls on the 2250 console. I have a customer who wants the operator to make only local calls from the 2250 console. I tried to change the NCOS value in ATT_DATA, but all in vain. The 2250 gets unrestricted. Thanks Rajdhani

enable the dchannel message which would help you to know whether the call is really hitting the switch or not and also take a note of the digits sent by the service provider. the digits sent by the provider should be a valid DN of the switch Raj

hi one 6480 passport is down , if anybody interested to visit the site today for problem isolation please reply. regds Rajdhan

Hi i am facing a problem in installing CP mini 1.6 After entering all the required parameters in the quick install wizard and when i click install, the page is getting expired. would appreciate if anyone can help me on this. Thanks Raj

Its better u can try techman3030 option before reseating.

enl aml 9 lyr2 est aml 9 enl aml 9 lyr7

You can try enabling the AML enl aml 9 , if it fails u can try reseating the SDI card & try enabling again.

I feel MM is not able to contact switch cos u r AML link is down. Licenses of MM is validated through AUX ID of the switch. FOX security check will pass once MM establishes connection with switch.

Can you check AML link is up . We had a similar prob we did the following excercise If AML link is down or not establishing then MM will hang at this point. If AML link is down,just come out of LD 48 & log out of the PABX till u get a message AMLXXX on the terminal. If Still there is no...

Hi Am looking for NTDK85aa 3 KM MM fiber DB new/refurbed , Appreciate if i could get vendor contacts/website /quote. cheers

Hi I faced similar prob , after changing the option while importing it worked,I forgot which option i chose its not standard nor call by call the third option worked. cheers

Hi I Think if u use Give IVR treatment ,call will retain its position in the queue & will not be treated as new. cheers

We have an issue with Meridian & Conversations MMS dialer . Agent audio links are on PRI ,only last protocol worked was Swis.( Tested out all the protocol in meridian but only swix protocol worked) Issue is Ist 15 channels are working fine but from 16th to 23 channel voice is not going through...

Hi We faced a similar problem wherein , Mgate card, DSP Board both went faulty ,Ultimately Both cards & Cable were replaced simultaneously. But in our case it was not dead air call pilot channels were not coming into service. One reason for dead air may be SCN number mapping in config...

I feel it may be the channels going into infinite loop ,Do u have any menu services defined/ or the other reason may busy tone detection from external trunks which is helding up the voice mail ports.

Hi I tried that option , of setting the Idle value to 7 in XMIT of lvl 2 forward signal but there is no improvements. raj