Search results for query: *

Rebooting Callpilot solved the problem Thanks

Hi i have installed a new CallPilot mini with 11c rls 4.5, It worked ok but after 4 weeks i am getting strange problem with a single mail box, when i try to access that mail box an error message heard "MailBox is already in use" how ever i am sure no body is accessing this mailbox beside me. Any...

I will try GHTROUT suggestions and will be back with result

I reinstalled OS from scratch also with no database and it still gave same error,Tried cleaning Dongle also. Yes i downloaded Keycode from Website and also got Blue keycode sheet from Nortel and System Id`s are same. I am not sure about Daughter board NTTK13/25. I dont have these D/Boards. Still...

Hi i have a M3904 set on which there are 2 DID numbers are programmed on Key1 and Key2 Key 0 SCR 4240 Key 1 SCR 4233 Now customer need to forward key 1 calls only? i mean some times he use to be at some other extension and before going to other ext he wants to forward his key 1 only on that...

The dongle is fitted already. Any more help regards

Yes this is a TDM, i mean all analog and DLC cards with PRI`s.

Can somebody explain OVLR/OVLS function, the original question seems lost in this thread.

Hi all i upgraded a release 4.5,11c,SSC to release 5. There were some digital ISM, PCA and 2 packages upgraded, Upgrade was successful and keycode validation was also successful but after rebooting and few minutes i got error message " Security device not found or missing or security device have...

Thanks for the info, but am not understand what should i do with that extra MGC, any advise in this?? Ok i am planning these 9 PRI cards as (a) 3 PRI card in first cabinet==> 4 0 4/4 0 5/4 0 6 with clock controller on 4 0 4. (b) 3 PRI in 2nd cabinet==> 4 1 4/4 1 5/4 1 6. (c) 3 PRI in 3rd...

I designed that system through Noretl Enterprise configurator, and i dont know why that extra MGC for? it is a 4 cabinet system. Can i distribute these PRI cards in all 4 cabinets? Regards

Hi all i got a cs1000e rls 5 to install at some time. The system configuration is as follows MGC cards=05 CPPM SS =01 CPPM =01 SIP Trunk=32 IP user =25 Analog ext=192 (12 cards) DLC user = 32 (2 cards) PRI cards =09 call pilot 600 r. It has 4 cabinets (11c cabinets). Now i need advise in...

Here is the info ELAN=10.10.10.x/255.255.255.0 CLAN=10.10.9.x/255.255.255.0 Gateway=10.10.9.1 I doubled check the IP info today and they seems to be OK.Any more advice. Regards

Hi all, I have 20 IP users already but no IP extension configured yet. Default gateway is configured(dummy, i mean there is no physical gateway in our LAN so i used a dummy IP for gateway). DO i need DSP in each MGC for pure TDM ,i mean DLC and 500 ext phones?? As far as the question asked why...

Hi, it is CS1000E rls 5 with 3 cabinets. I have configured this system, All MGC are showing correct loop configuration and all VGW channels/DSP ports are showing registered, patches are also updated. It s a analog/digital Mix extension PBX with no IP extension configure. Within cabinet all ext...

Here is the procedure which i am following for upgrade. product-->comm server 1000-->qote activity-->upgrade and expansion-->existing system type-->CS1000E-->Serial no of pbx(298811547)-->then select download-->it shows summary-->then select go then it ask for opi...here i got stuck take cares

In which option do i have to select upgrade ??if yes then it ask OPI file?? what shud i do next?it ask for orderpro file

Guru where can i find this configurator?? any URL?? Regards

I need to upgrade this CS1000E thats why i need OPI, what should i do to send upgrade request to nortel

I tried already with 7.0.2 then 7.2 with same error. regards