Search results for query: *

Our Company decided to pull the plug on the Siemens contract years ago so we have been working on an older Rev; 5.0.19 and many of them have been getting stuck in Initialising so I've definately traced it to an issue with phones getting duplicate ip addresses. Has any one else experienced this...

Thanks Birdseye I deleted it and recreated.. it was setup in the numbering plan to route out to a SIP gateway that we have so it worked by just being routed although it wasn't defined as a station.

Hi donb01, the station won't come up in assistant.. Hi birdseye; DIS-WABE:TYPE=GEN,CD=2901; H500: AMO WABE STARTED ------------------------------------------------------------------------------ | DIGIT INTERPRETATION VALID FOR ALL DIAL PLANS |...

Hi All, I'm trying to setup a call fwd unconditional but get stuck at line F01: ADD-ZIEL:FWD,2901,VCE,80116568762000,"",CFU,INT,SYSTEM; H500: AMO ZIEL STARTED F01: SOURCE STATION 2901 IS UNASSIGNED OR AS AN ACD NUMBER (AMO DNIT) CONFIGURED. Any one know why my station 2901...

Hello, My H3K V4 suddenly decided to drop calls from external callers instead of forwarding to voicemail on no answer. Internal forward is ok. I've had the local Telco check the T1's and they say they get a disconnect from the switch. Any ideas on what could be causing this or what I can...

Maybe it's the firmware I have or something.. I did not try both at once but.. I did get it to work by Option, Right arrow to menu item Logoff Thanks!!!!!!!

Hmm, doesnt seem to be working :-( any other ideas?

Hi all, I have an Avaya IP 5610SW phone that I need to set it to a different extension. Is there a way to do this from the actual phone? I was told hold the * down as I'm booting up but that only seems to get me to the IP and system stuff, not the actual extension the phone needs to be...

Hi All, We setup a new (Asterisk) mail server but it's not getting the Redirected Dialed Number Information so there is no way to tell how to identify the redirected number and send it to the correct mailbox. Is there a way to turn on the Redirected Dialed Number Information Service? This is...

Thanks again donb, I bow to your great knowledge once again..

Hello, Can anyone tell me which cards support a T1 circuit on the Hipath 3K and if there is a way to find out which ports are in use or not? We currently have the following installed: CBCPR HXGM3 SLA24N HXGM3 STMD8 SLMO24 TMST1 TMGL8 PSU Thanks! ---Mike

Thanks Donb, sta-hista seems to work..

Hello, Does anyone know how to check the logs from AMO? In particular, I am hoping to find log data on a certain PEN (pen,1,1,13,1) Which goes to our voicemail server. Seems our VM server MWI (Message Waitin Indicator) intermittently does not come on for users with new voice mails unless I...

Our system will beep if you have a voicemail waiting..

Thanks Guys.. ---Mike

Anyone ever do this? Is a DLS Server required? I want to go from 5.0.19.0 to 6x Thanks!

Hi All, I have a Hipath 3000 and use Manager-E software to administer. The system time is off by about 5 minutes, does any one know how to change this? Thanks, ---Mike

Thanks Don... Yes, definitely plugging into the correct port, we use Power over Ethernet so when they power up, that confirms it.. I thought I went through all of the configurations of the phone but that's a good point, I'll go through again and see if I can find anything.. We can't get to...

Nope, no changes, I also handle the network and have not done any changes.. Let me add some info on this problem; Most Optipoint 420 Standard phones with version 5x if not on the network for a few days or more get stuck in init. Siemens solution was to give us version 6x phones but most of...

Most of our Optipoint 420 standard phones get stuck in init. Has anyone else encountered this problem?