Search results for query: *

number_conversion_initiate -entry 390 -conversiontype 4 -numbertype 1 -truncate 2 -pre 0 number_conversion_initiate -entry 393 -conversiontype 4 -numbertype 1 -truncate 2 -pre 0

Probably your system release do not know itype 28 ;) dennyl89

hi The function is recommended to be placed on a key with a LED The function can only be defined on telephone types, DBC 631, DBC 661/662, DBC 203/213, DBC 223(itype=28) and DBC 225, and only when the feature Name and number Log is loaded in the exchange ksfkc:dir=7323,fcn=nlog,key=13; dennyl89

you can move the extension from MD to CUCM,changing the extension in destination with: nanse:numtyp=ex,numse=ABCD; nansi:numtyp=ed,numse=ABCD; roddi:dest=ABCD,rou=qsig to CUCM; dennyl89

Thanks itvasc1 it works Denny

I'll try it Dennyl89

hi all i need help,please SCENARIO: MD110 TSW SP7 Italian Market I cannot divert from A,B to C with *21*xxxx*yyyy# I put patch in DER like the object say I remembered 3rd CDIV(external follow me) bit enable feature,isnt'it? any help would be appreciated

RESOLVED FYI "If national ISDN is used and the market is Italy the following applies 1) If the calling party is an analogue extension the call should be “3.1 kHz”. 2) If the calling party is anything else like digital the call should be “speech”. In SLP60 (5.0 SP6 and maybe earlier) there is...

thank you Norbert I'll try and i'll let you know Denny

I use xammp from my pc like webserver,the message file is in RVA directory C:/xammp/htdocs/rva and it must be named message001.wav,message002.wav etc etc you can use whatever you want.... es: recorded_announcement_prompt --load --host "ip address your webserver " --file message001.wav --path...

I do not see any ip address in RODDI command... RODDI:DEST=8688,ROU=99,ADC=0717100000000250107001101000,TRC=0,SRT=1,NUMACK=0,ip="UNIFY ip address"; and i do not see RIANI command (i.e g711 a-law) RIANI:ROU=99,CODECS=B-1-2-3-4-5-6-7-8-9-A-C-0; Denny

can you try with "MODE=1" in command OPERI Denny

I try to attach the trace hoping somebody could help me... Outgoing Message: SETUP Call Reference: 5D 9D (CR Flag Not Set) Protocol Discriminator: Q.931 user-network call control protocol BEARER CAPABILITY IE: Coding Standard: CCITT standardized Information Transfer...

Vodadoda, the last two commands you could avoid ;D Denny

hi all i receive this message every time and ONLY when i call a national number 06xxxxxxxx trough a PRI FW with my MXONE TSE5.0 SP6 in overlap selection (i can't make enbloc sending now :( ) in my trace i see a setup message incomplete,the answer setup ack from network and a series of...

You can try with mode=1 in operi command

You must create a file to cancel extension in a directory /tmp i.e and send it with "mdsh -f ip_extension -e" with the switch -f FORCE turn off confirmation of dangerous command bye

The default password is Telephone. This password can be changed by using the following procedure: • Log in to one IP phone via SSH. VxWorks login: admin Password: Telephone • Enter the command encryptPasswd "new wanted password" (quotation mark must be used). The password must be at least eight...

precisely why I said "serial cable" do you understand satellite 1890?

serial cable no?