MD110 Default Route

[HarryHa]

Hi All,

I am in the process of migrating a ~3000 user MD110 to a new Cisco system and looking for ways to make this the least painful. I have set up some QSIGs to interact between the 2 systems and now am looking to move the ISDN service to the Cisco system.

Is there a way on the MD110 to route an unrecognised (eg. not local) extension straight across the QSIG to then be processed by the Cisco system.

Any help greatly appreciated.

Regards,

Harry

 

[lindelott]

you can move the extension from MD to CUCM,changing the extension in destination with:

nanse:numtyp=ex,numse=ABCD;
nansi:numtyp=ed,numse=ABCD;
roddi:dest=ABCD,rou=qsig to CUCM;

dennyl89

 

[snor]

Hi,
can you take a look to the Mitel "knowledge base" and search for "Smooth Migration" ?
There are patches for BC11, BC12 and TSW available for such a scenario.
Maybe this is helpfull for you.
(P.S. I have never tried this patches)
best regards,
Norbert