Music on Hold on MX-One

[miranpiscanc1]

Hello everyone.
I want to know how to load or replace the music on hold that is currently loaded on a MX-ONE 5.0 SP4. Currently the phones use the function Continuous annoouncement the message appointed voice message001 loaded in the Voice message.
thanks

Miran Piscanc

http://www.mpcommunications.it

 

[lindelott]

I use xammp from my pc like webserver,the message file is in RVA directory C:/xammp/htdocs/rva and it must be named message001.wav,message002.wav etc etc
you can use whatever you want....

es:
recorded_announcement_prompt --load --host "ip address your webserver " --file message001.wav --path "path your file on your webserver"
recorded_announcement_prompt --activate --file message001.wav
aspacarnum=116,parval=63;
ramdi:ann=1,msg=1;
racei:dir=xxx,cont=1;

Cheer
Denny

 

[miranpiscanc1]

thanks for the reply.
In that compression must be the wav file?

Miran Piscanc

http://www.mpcommunications.it

 

[snor]

FILE FORMAT
The recording format is Pulse Code Modulation (PCM), according to ITU-T recommendation
G.711 (A- or m-law, mono, sampling frequency 8000 Hz). Files must be stored in
little-endian format (which is normal when recording on an Intel-based PC). Standard
tools, such as Microsoft Sound Recorder, can be used.
The speech level of RVAs must follow recommendations in ITU-T specification G.115.
regards,
Norbert