Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. EPearson

    Delivering Number out on SIP devices

    I just installed a 5610 IP Dect SIP cordless phone. I need a to deliver the number back out on PRI. I usually use associated number in 3300 forms for MINET phones but doesn't seem to work on SIP devices. The number im delivering is good for delivery out Any help appreciated
  2. EPearson

    How to beat asterisk

    Everything you quote should be Virtual...vMCD vMAS...Number one thing people that jump on the SIP bandwagon dont realize is the most costly item in any comminucations platform are phones and SIp or No SIP you still have by them unless you go softphone everywhere. SIP is fine but there is still...
  3. EPearson

    Microsoft Lync with 3300

    Anyone using Microsoft Lync 2013 with MCD/3300 instead of Unified Communicator. I know UCA has a Lync Plug-in but I am talking no UCA at all. I have a customer that is interested.
  4. EPearson

    Clustered 3300 Embedded Voicemail won't answer

    When I built the ARS Route I made the mistake of selecting Route Type of PSTN Access Via DPNSS...there are 4 options of type of route Emergency, Blank, Non-verifed Account, PSTN Via DPNSS...should have been BLANK
  5. EPearson

    Clustered 3300 Embedded Voicemail won't answer

    Fixed it. When I built the route I made the mistake and added to the Direct IP Route -(PSTN ACCESS VIA DPNSS). Should have left it blank on that parameter. Not very good information on setting up DIRECT IP ROUTING in E-DOCs
  6. EPearson

    Clustered 3300 Embedded Voicemail won't answer

    Sorry it will go extension to extension but transfering an outside call from existing cluster to new cluster with embedded voicemail will not go. I have checked call rerouting.
  7. EPearson

    Clustered 3300 Embedded Voicemail won't answer

    I have just added a new 3300 to 2 system Cluster. The new cluster is using embedded 3300 voicemail. The first 2 controlers are using MAS. When calling the new cluster I can't get the voicemail to answer on the embedded. I can call voicemail directly on the new cluster(hunt access code 6000)...
  8. EPearson

    Mitel Pet Peeves, DCR's, and Wish lists I think its time for another wish list

    Key System Features such as being able to assign individual analog lines like a 200ICP. Also be able to suppress Calling Line ID on a per call basis on outbound PRI Non-SIP calls.
  9. EPearson

    SIP Trunks on MCD 5.0

    We are just in the beginning stages for implementing SIP trunks on our 3300. Is Mitel Border Gateway required for SIP Trunks?
  10. EPearson

    Oaisys Call recording on MCD 5.0 question

    I just setup Oaisys call recording 7.2 on MCD 5.0. Works great!! However is there a way to ignore calls with a duration under 30 seconds. I have looked everywhere and don't seem to see it. Any help is appreciated
  11. EPearson

    mitel loudringer

    Current on speaker is plenty especially if you buy a valcom 15 watt...they are self ampified....all you need is a power supply, horn, audio from speaker inside phone...very simple...buy a Valcom V-1030c 5 watt or V-1036c 15 watt and power supply
  12. EPearson

    mitel loudringer

    I would just tap into the audio of the speaker under the handset. Take the screw loose from back and there is a red and black wire that goes from the circuitboard to the speaker for ringing and paging depending which model. You can either solder or super glue a pair from Cat5...run it out the...
  13. EPearson

    SX200ICP 5220 ext 110 died, how to make another 5220 take on attributes of dead phone

    plug up new phone....it will say use superkey to send pin....###110 and blue superkey...this will send new MAC to 200ICP as a replacement....typically ### is replacement code
  14. EPearson

    3300 Wish List and Pet Peeves

    1. Key system features like the 200 ICP. Ability to add individual lines to phones. 2. Voicemail key (like 200 ICP) for transfering callers directly to there voicemail greeting...I know there is a 3300 work around but it sucks. 3. Ability to suppress your Calling Number on a per call basis...
  15. EPearson

    Settings for trunk paging port on 3300 5.0?

    I have a trunk page port set up on a 3300 CX 5.0 to interface with a Valcom Multipath. I works fine for a while but then page port busys out and I either have to restore by maintenance command or reset the 3300. The multipath port never busys out just the trunk port on the 3300. What could I...
  16. EPearson

    Blocking extension from calling another extension?

    200ICP actually has a COS option to block extension to extension calling because of hosptality ....But the 5600 is i think based on 3300 call control and the only way I would know how would be to put each extension in as a different tenant...then block tenant calling...it would be a nightmare...
  17. EPearson

    Help!!! UCA Mobile

    Does a SIP device have to be created in the MBG for the UCA Mobile to work?
  18. EPearson

    Help!!! UCA Mobile

    I am trying to get UCA Mobile to work on Andriod and IPAD. UCA is 5.0 and MBG is 7.1. I have UCA PC Client working on my laptop and on remote IP phones working through MBG. The MBG is in the DMZ...NOT NETWORK EDGE 1. I have UCA Mobile licenses and MBG Licenses 2. I have real world FQDN for...
  19. EPearson

    Light MWI on extension with different number mbox on EMEM

    install an analog extension to everyones desk....install the Viking VR-1A instead of phone...make the analog extension/VR-1A the voicemail boxes extension....when a message is left it will light the Viking VR-1A...then they will login as remote voicemail user and check the analog...
  20. EPearson

    Command for restarting Avanced UM on Nupoint?

    root@nupoint ~]# cd / [root@nupoint /]# cd /usr/vm/bin [root@nupoint bin]# restartUmPro.sh Restarting UM Pro services: msbBridge umProServer mailboxDepot - Terminating msbBridge...... - Terminating umProServer - Terminating mailboxDepot - Starting msbBridge, pid = 12160 - Starting...

Part and Inventory Search

Back
Top