Search results for query: *

this is the error that I am getting when using element manager Detector 'BCMDetector' cannot determine the device type for 10.a.b.c

yes all of the extension are down. I can connect to this BCM through the web gui but not through element manager.

We tried that and the extension did become active. Could it be the OS corruption.

Our BCM 400 power supply died. We change the power supply with a PC ATX power supply. After booting the BCM, none of the extension came on. All of the extension cards are up except for the combo card. There are no light on this card. What may be the cause of this problem.

the details of the PBX i do not know. add/moves/changes is what i am really responsible for. However i see where you are comming from with the messages. I will contact a CS1 tech and have him work out this kink. Thanks alot.

I do not think that is the case, i have tried a few other ip address however none works. What I did not add was that extension dialing to different PBX stop working also. I hope that this can shed some light on the issue. Note also that i can ping the PBX from the remote site and locally.

We have had this CS1K for many years. There have been many instances when electricity went off. However yesterday after an electricity outage, i am now not able to login. What i usually do is telnet to the address. place in my user id and password. then cslogin and password. THen i would...

I am trying to make an international call on our BCM400. however when i try dialing the 10 digit number i get this message - restricted call. I contacted the tele company and they told me it is our PBX that is restriction the calls. Is there a default feature code for international calls or...

I don't know if i need codes, but this is what i am aming for, my boss wants to be able to call overseas or toll call from any phone on the BCM400. How can i go about setting this up. Thanks

Good day all, we have a BCM400 and i must create authtication codes for long distance calling, or toll calling. I have never set this up before and would be greatful for some pointers. All help would be most appreciated. Thanks.

Sorry guys, My telco provider did not do the necessary configuration needed, thus when i did the programming it did not work until telco made the configuration at there end.

Thanks

My issue is that i do not know what target line to use. Can i use any available target line to any extension?

Good morning all, I am trying to setup 4 DID, We already have 20 setup. My problem is i cannot figure out which line to program the DID on. Or the line the extention is install on. I will appreaciate any help. Thanks.

Thanks a million

It is the NXX-xxxx

Good day, A new telephone company open in our region, the issue is that our CS1K cannot dial this new numbers or prefex. It just rings busy when dial. I need to be pointed in the correct direction to reslove this matter. Can you please assists.

I need to have my director and secretary phone in the same pickup group. I know how to do this in the CS1K, however in the BCM400 i am having problems, frankly i do not know where to start. Can you kindly assist me with this please.

We have a BCM400, all of the current extension are route or map to DID's. The DID'S are routed thourgh IP's via a direct line of site connection. I cannot see how this was accomplish and would like some assistance. an example of the numbers are ext. 2273 and the DID is 6773245. Thank you.

Thank you, i got the ip phone working, the password was 2264.