Search results for query: *

Great help and it worked! thank you very much Oldestgeek! Have a nice day.

Hi, Please let me know if this can be accomplished, if yes, i appreciate some help to get it done. There are 2 Sites with BCM50. Site A has External Trunk. Site B doesnt have. I want if anybody called to the External trunk number in Site A, should go (redirect) this call to the Site B thru the...

Hi all, With all yours help, i could finish it successfully. Now the Site B can access the site A trunk. The nortel documentation also helped. Now, i would like to know, how do i set the restriction in both ends? In the site B, not all need the dial out access through the destination code i set...

Thanks to all for your helpful posts. Mr. Raymond, I will do the search, but i dont know the name of that feature i want to get done. From the second post i believe it is remote packaging? I have VoIP trunk keycodes in both places, what other keycodes required for this scenario? Hawks, Pkellow...

Hi, I have 2 sites IP conntected using BCM50. Site A has the external trunk and Site B not. How can i setup the Site B to call outside through the Site A's trunk? Please advise what are the requirements and a helpful push on how to implement it. Thanks in advance.

Hi, I have BCM50 site to site implemented. When i direct dial to a DN at site B, if the user didnt attend the call, it redirects to the operator. How can set it as follows: - if call not answered, stay ring until picked (ring forever) - Or, forward to central greeting table (saying "the person...

I even tried with a new BCM50, still happens the same. The telecom says its the PBX issue. But the message looks the problem is with telecom company.

Hi, BCM50 Rel.3. Augurst 2009 update patched. When dialing to one of the numbers i get the audio message from carrier "The number you are dialled is temporarily out of service" instead of hearing my autoattendant greeting. I tried removing the line from the PBX and directly connected to analog...

Thanks for that info, i would like to have the line informaton of BCM400 also, anyone can help?

Hi HOw many CO lines are in a BCM 400 and 50? Which range are used for VOIP and non VOIP calls? Thanks for your input

Bombone, I have 2 BCMs one at site A, and one at site B with voip trunks between, all are digital phones (i dont have ip phones). Still possible?

Thanks for the replies. OK, instead of paging, voice call to individual set is possible in IP trunk? Regards

I read somewhere, the remote paging is not available for IP trunks, is it right?

Thanks oldestgeek, I am not changing the the DN length in the 'renumbering'. What i mentioned is, When i change the dn length to 4, BCM automatically add number 2 in front. means: 101 becomes 2101 102 becomes 2102 What i wanted to know is, can i control this number 2? I want append number 3...

Without third party appliance/application, is it not possible in BCM itself?

Hi Is it possible to page to the DNs at another VoIP site? How do we configure this if it is possible? Thanks

Hi When changing the DN Length from 3 to 4 in BCM50, It appends number 2 in front of the current DNs. Is it possible to define append other number than 2? Also, how does the renumbering works? I did try to renumber the DNs but it doesnt change anything. Thanks

So, Zone ID and Private network ID on a same site can be the same figures? I have multiple sites all are configured site 2 site VoIP, These settings are important to me? Can be reflected in voice communication negatively if not set? Thanks again

Thanks Snowman, I searched the services, but it was under 'Session>IPADDRESS>Save Programming Record'. Thanks for your help. Regards

Hi, Is there a way to get the system configuration reporting in BCM400 and 50? To know the system DN configurations, names, restriction filters, Lines, Voip lines etc. I appreciate your help