Search results for query: *

Make sure that the user does not have forward Hunt Groups calls checked.

92125551212,PPPPPPPPPPPP1234567890 You may have to adjust the amount of "P" you put but this should do it. The time on the "P" starts when the dial number is done so this is dependent on how long it take to find a line out and then how long the device at the other end takes to answer the call...

Short Codes Short codes entered in this list can only be dialed by the user. They will override any matching user rights or system short code. User and User Rights short codes are only applied to numbers dialed by that user. For example they are not applied to calls forwarded via the user.

Short Codes Short codes entered in this list can only be dialed by the user. They will override any matching user rights or system short code. User and User Rights short codes are only applied to numbers dialed by that user. For example they are not applied to calls forwarded via the user...

Build two short codes in the users Short code tab. I the example below this prevents the user to call extensions that begin with 1 and will allows the user to press 2 and it will call extension 1104. Hope this help.

Thank you

When Logging into Web Manger 11.0.4.0.0 Build 7 I can not see the Certificates on the system. I can open Manager and go to security setting and see these. Does anyone have any ideas why this would be happening in Web Manager?

You can upload this file using Web Manager you still will need to reboot system after. This will save you time other than removing the SD card. If you have remote you don't even have to leave your office

What happens if you try and call X5416 from a system phone?

Yes the ringing can be shut off per extension. This is done thru system programming Feature 00 left intercom twice, right intercom once enter extension number solid lights Immediate ring, slow flash delay ring & rapid flash NO ring

Extract the new bin files under the Manager directory then bring up the manager and connect to the system go under advanced and do upgrade. It should show that the system will be upgraded to 9.0.3.16 build 2. Do the upgrade then you are done.

Once you enter the authorization code you need to press the # key. Try it.

Master Base Station Setup 1. Select General and then select the NTP tab. 2. Using the Timezone drop-down menu, select the appropriate time zone for you area. 3. Click OK. Hope this helps

Look at the programming on this phone and make shure that you still have your SA buttons assigned. When someone calls the phone do you see any lights blinking???

This is what the calling group 152 should look like DIRECT GROUP CALLING INFORMATION Group # : 152 Group Type : AutoLogout Call Distribution Type : CIRCULAR PryAnn No. EXT # LABEL Messaging Announcement 1...

The easiest way to set up the Faxfinder is to use adjuncts and set these use to match your DID numbers 2, 3 or 4 digit does not matter how many digits they are. Setup a calling group as a generic VM include the to T/R port extensions numbers as Members of that Calling group. Set up a cover...

Just a little info covered calls do not go to Voice mail. They can only ring at an extension. Transfered calls are the only calls that go to voice mail.

You must give these Extensions trunk to trunk transfer or they can not do this.

This is a feature that was add to Magix 2.2 and newer releases I don't know what release you are using but is might be worth the upgrade. Then you just add it to the page group. Loudspeaker Page with Group Page. This feature enhancement allows up to two Loudspeaker Paging ports to be added to...