Search results for query: *

I have upgraded all to v9 but I didn't try copy and paste Will try tonight

Hi Have about 20 NS700 changing over from ISDN to SIP Trunks, all went well with the first few but the ISP SIP provider is using the symbol ^ in the password and the Panasonic NS700 wont accept this in the password. Obliviously I have asked the SIP provider to change the symbol to something...

Hi all Just looking for some help Setup as follows NCP1000 and TVM50 Have been using GMAIL as the relay on the TVM50 for email sending with no problems but client for security issues wants to use email address from office365 rather than Gmail. Cannot get to work keeps failing to send out an...

Many thanks for all your help eventually got it working. One thing I notice Blueface do not require port forwarding for the sip trunks to work

Blueface is complaint they are still listed on the NEC customer portal. Unfortunately its going back to 2017 and I have rang Blueface but they are not much help

Hi ALL Anyone any experience in installing Blueface sip trunks onto the SL2100...I have tried everything but no joy Have the same problem with Eir sip trunks No issues with both providers on the Panasonic systems Have about 5 sl2100 all needing sip trunks install to replace ISDN Any help...

Hi All Have a number of sites using the softphone but with windows updates the softphones crash freeze all the time. Any alternative softphone suggestions SIP based etc Michael

UPDATE Got the password changed to suit the NS700 and all SIP trunks worked no problem What am I missing on the SL2100

Hi ALL Looking for help urgently or some sort of guidelines, I have check over the internet for help and follow all there advice but no joy. I have two sip providers Blueface and Eircom and I cannot either of them to work on the SL2100 I can get Blueface to work on the Panasonic ns700 but not...

Hi Looking for some help with installing 6 sip trunks from Eir Irish Telecom supplier onto the sl2100. Have licenses installed - 6 trunk licences. Eir use registration user name and password and they use the following as their sip server sipv-bt-pub.ngv.eircom.net I think BT supply them...

Hi All I have a number of customers using the softphone on the NS700 but lately the softphones are crashing etc. I presume with no new update's on the softphone the problem will continue on... So looking for alternative probably sip type softphone, anyone testing or using alternative at the...

Hi All Have a customer with a KXTDE200 working well but it also has about 15 system Dects and cell stations etc attached. I cannot replaced the faulty system dects handsets, my question is there alternative cordless system available without replacing the pbx. The building has good wifi Michael

Hi can you help From a previous thread I have moved from Panasonic to NEC and cannot figure out the night setup for auto attendant. What I want to happen is as follows Day Mode...Auto Attendant answers gives options etc...a number of the options go to external numbers. Message 1 (501) Night...

Hi @belevedere Many thanks for the help...so far I have completed the auto attendant but still having an issue with the option of dialling 1 to external number. What I have done so far...I have setup the virtual extension say ext 130 set call forwarding to the number which 90044125...

Hi First post on the NEC 2100, have moved from Panasonic to NEC Setting up a number of Auto Attendant's with options for example Press 1 to an external number. Not clear on the correct setup of the trunk to trunk transfer. Do I use a speed dial code in the destination for example on the...

This worked 1). Open Settings 2). Hit #136 3). Select Factory Reset 4). Remove network cable from LAN Port ( not PC port ) 5). Hit Yes 6). Hit Yes again 7). Wait 8). Connection should fail .. go into Setup 9). Change network config, from dhcp to static 10). Assign a static address ( ex...

The factory reset was #136 Still doesn't clear the embedded password

Wondering can anybody help Purchased a new number of HDV130 sip phones for a NS700 (phones are hard to get) Anyway the embedded web page is password blocked by I presume a sip provider eg Blueface in this case I did a factory reset etc but no good. I have tried admin and adminpass Any idea...

Hi This problem is killing me cannot figure it out.... Have a customer with a NCP500 and a TVM50 and have only one problem. I am using custom menu 1 on the TVM which is fine but when a customer presses 1 it comes back with incorrect entry (INTERMITTELY) Checked the trace on the TVM and its...

Is the mobile licence NSE101 that I need . Maybe I didn't have a enough of them on the system