Panasonic HDV130

[mhlduffy]

Wondering can anybody help

Purchased a new number of HDV130 sip phones for a NS700 (phones are hard to get)

Anyway the embedded web page is password blocked by I presume a sip provider eg Blueface in this case

I did a factory reset etc but no good. I have tried admin and adminpass

Any idea of a work around so I can register them to the NS700

Many thanks if you can help

Michael

 

[obtsystems]

Have you tried using an ftp server and dhcp options to program the phone. You could update the firmware

 

[Mike_K]

How did you reset KX-HDV130?
159#?

 

[mhlduffy]

The factory reset was #136

Still doesn't clear the embedded password

 

[Mike_K]

 

[mhlduffy]

This worked

1). Open Settings
2). Hit #136
3). Select Factory Reset
4). Remove network cable from LAN Port ( not PC port )
5). Hit Yes
6). Hit Yes again
7). Wait
8). Connection should fail .. go into Setup
9). Change network config, from dhcp to static
10). Assign a static address ( ex 192.168.1.200 ) and use a dummy default gateway ( ie 192.168.1.25 )
11). Enable web port
12). Login to the phone ( default user: admin default pass: adminpass )
13). Click on Maintenance tab
14). Click on Provisioning Maintenance and select NO and hit SAVE
15). Download the recent and CORRECT firmware from Panasonic ( panasonic.net/pcc/support/sipphone/download/UT1/others.html ) – check the sticker under phone for correct model
16). Go back into Maintenance and upload the firmware via Local Firmware
17). Reboot, re-enable web port and configure the phone as need be

 

[obtsystems]

Nice work around

Thanks for sharing