Search results for query: *

do I have to change anything in the g450s? Do I turn off synchronization over ip?

We are removing all of our DS-1 circuits. How to we set sync timing on our gateways (36 gateways)

List aar analysis

What changes do I have to make to implement local sync on the gateways (CM8.1)

we upgraded to sip trunking from pri. Now that we do not have any ds-1 lines how to we sync time our 36 g450s and 2 g650s

Thank you Tier 3

We use the g650s for 2 wire isdn phones. we have bridge tap and distance issues with some of our buildings. Digital phones will not work. ISDN 4 wire boards will not work. The users do not want analog. Also we cannot use voip because these customers are not on our network.

We have CM8.1 with 36 g450s and to g650s. we are cutting over to sip and the pris are going away. What do we use for a sync source on the G650s now that there will be no Pris plugged into them.

1.Services 2. Inventory 3. Manage Elements 4. CM Main Duplex 5. Edit 6. Change Password to Match CM password In smgr make sure your cm login and password are active.

Avaya is shipping a new G650 next week. hopefully this fixes the problem. thank you for the info.

could it be the backplane of the g650? This happened when we had to power down the power unit when we changed out our UPS

655A power supply not working. swapped it with a good power supply from another g650 still not working. checked power cord had 115 volts. when I run test board command it shows no board.

All of my g450s (36) use the address for control ip address and they are in the private network. Can I move the procr to the network region that the gateways are in?

My clan and pe are in the same network region and h.323 is turned on. I will turn h.323 off. Will this effect anything else?

we are CM6.3. Our avaya network is closed off from the corporate network with different subnet. We have clans and medpros on the corporate network. We are trying to deploy a couple of 9640 phones for the first time in a couple of years. they are trying to register to the processor in the avaya...

The 2420 phone has 24 buttons

I am on Cm6.3 and can not get that command. I looked at special applications Sa8886 but not sure how that works.

Thanks for the replies. We are pri and we did check with our carrier. We will live with it.

people are spoofing our number block (10,000 lines) and calling our extensions. Our extensions are answering the calls thinking they are someone in our system. We would like to block all incoming calls that do this. We are CM 6.3

We are getting incoming calls from people spoofing our numbers. We own all 10000 line. We would like to block all ten thousand lines. If people in our system dial all ten digits we strip the first five digits to keep it in the system. we are on CM 6.3