Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
HP 3320 USB will not install
The computer is running 98se. I have the latest driver from HP and it will not run. I am really baffled. I dug out a loaner PC that is a twin to the one mentioned in my post and the printer installed like a dream. I was able to install Office 97 on the machine without a hitch so the drive is...- dellisia
- Post #4
- Forum: PC hardware - Peripheral issues
-
HP 3320 USB will not install
I have an HP 3320b printer that will run (I hope) on a homebuilt that has a 400 Mhz PII with 128mb ram. the hard drive is at maybe 20% full. Other software will autorun but the drive CD that came with the printer will not even start. I tried the run box with the autorun and the setup.exe files...- dellisia
- Thread
- Replies: 4
- Forum: PC hardware - Peripheral issues
-
Format Terminated
You might want to try software from Gibson Research. Go to GRC.com and read up on hard drive antics and solutions. Steve works wonders for recalcitrant drives.- dellisia
- Post #5
- Forum: PC hardware - Hard drive issues
-
ECS Motherboard 1.4 athlon t-bird startup problems
Sounds like one of two issues with Athlon processors and specific motherboards. The ECS board is very stable, imho, but it does need to be setup correctly. Be sure the RAM jumper is set to the proper position. If that is done then find an AMD certified 300W or larger power supply and install it...- dellisia
- Post #6
- Forum: PC hardware - General discussion
-
ECS K7S5A - Any good?
I have used this board for two machines. Both are rock solid. I have an AMD 1.33Ghz in one and an AMD XP1800 in the other. They work really really well. No problems in six months.- dellisia
- Post #2
- Forum: PC hardware - General discussion
