Search results for query: *

Thanks to all. Silver987 was right. They do have them and they have been ordered.

Does anyone know where I can get some 1.0f 5.5v Capacitors for the Norstat 6X16? Part number???? I have replaced some in the past but can not remember where I got them from.

I didn't mean to start a war. I did get my question answered by the computer tech that is doing the work in the new building. He is going to use the cat5 and blauns. However, I would like to address the cat3 v cat5 issue. I understand what all of you are talking about but I wire ALL my business...

Thanks all for your suggestions. The computer guy and I met at the site and what I placed is what he needed. There are several ways to accomplish this and all is fine. Again, thanks as I was worried since the building is to be all sheetrock and they plan on starting tomorrow!

PROBLEM SOLVED!!!!!!!!!!!!!!!!! I made a cardinal mistake.............I took what the customer told me to be correct. The fax was not what was causing the problem. I determined that after further testing this morning. What I found was a time clock plugged into a station port. It had a modem...

In response to Troski, the number that is being transfered to is the fax number for this business. The fax number is not on the system and is on its own iw not even goin close to the system. If I pull the jumper on line one at the demark and call it, it will just ring and ring but as soon as I...

Any call that comes in on line 1 will ring twice then is re-directed to an outside line. I have gone into the system programming and 'Call forwarding-to outside line' is denied. I have also gone to each station and did a 'cancel call forwarding-to outside line (FWD/DND + 0 + #) and the calls on...

I am wiring a new building for voice and data using cat3 and cat5e. This is a first for me so be easy! My customer wants to use 3 big screen Plasma HDTV's to use as monitors for the computer network. I have placed, as reccomended, a cat5e and a RG6 to each computer location back to the...

Thanks for the replys. I have installed the C6 and will see if my customer will want to upgrade to DR5 software or cancel the request. Looks like it will be just as cheap to upgrade to a CICS (refurb) as the C6 is so expensive.

I was told that caller ID would work on a 6X16 no matter what software. I have installed it on DR2 software and can not find anywhere in programming to set up caller ID. Will caller ID work on DR2 software? If not, what version of software is required?

You guys are the best. Thanks....

The page tone can not be disabled on an 8X24 ksu

On a mics with 12 port maxi expanded system, what is the actual mod numbering. For instance, in slot 1, what mod number is the bottom and in slot 2, what mod number is the top mod? I can't find this information in the installer guide. I say that slot 1, going from bottom to top is mod 09 thru...