Search results for query: *

Okay, well I got another hub (3com), and uplinked it with the linksys router and that seems to working fine. I'll have to test the linksys hub to see if that whats causing the problems. Thanks for the tip though.....

gee, that seems like an easy answer. However the router stiil works, I'm able to connect to the internet through it, do you think that the uplink port and/or port 1 is dead?

Hi, I have a linksys router befsr41 and it use to be uplink with a linksys 8 port hub. One day I had brought my router to a friends house for some network testing, it was uplinkned to a 5 port hub (the name escapes me). Anyway, I brought the router home and hooked it back up, and now when I...

No, I was able to install the latest BIOS update, but only with a P2 processor, so there wouldn't be a problem with it freezing during the update. But still the same problem lingers, even with the update.

It's a p3 500 100fsb, the problem is even in safe I have maybe 10 seconds (give or take), to access the BIOS before it freezes up, even in safe mode. So I can't change and save anything.

Unfortunately, there isn't seperate jumpers for the bus speed and multiplier, just 5 dip switches. I've tried reseting the cmos, and tried different P3 processors all at the same speed.

Yeah, right now I have it set on 100mhz bus with the jumpers on the board: 1,2,3-on, 4,5-off. I have tried it with the jumperfree mode as well, the processor is supported for the board. It's a p3 500/512/100/2v....

Hi, The problem I'm having is with an ASUS P3C-E, in which if I install a Pentium 3 500mhz processor, or a 400 and above celeron processor it will freeze when it starts up. Sometimes it freezes in the BIOS, sometimes it'll load the OS and then freeze. However, if I install a Pentium 2...