Search results for query: *

I have a question about the reply when I do SSCK 1.This is the response I get, can anybody tell me what the VCXO Aging is? By the way this is from an opt 81 ENBL CLOCK ACTIVE GROUP 1 SIDE 1 CLOCK CONTROLLER - TRACK ON LOOP 41 PREF - 41 SREF - 16 AUTO SWREF CLK - ENBL VCXO AGING CLOCK ACTIVE...

Probably 60 times a day. Thanks for the help Mike Patti

Am receiving errors from MM and can't find any explination of what error is. 2042 error 4/18/05 09:16 VH Node=1 HWLOC=1-1-1-1- Des Expect 7 SUs and got 1 OprCode=3 MsgState=11 Any help would be welcome. Thanks for the help Mike Patti

Does anyone know if Unity has the capability of Queing calls? Thanks for the help Mike Patti

Thanks for the help talked them out of doing this. Thanks for the help Mike Patti

Is there not a way to FNA a 2616 up the Keystrip to key 1 and then when no answer on key 1 go to VM? Thanks for the help Mike Patti

I am attempting to route LD calls from Cisco AVID to Nortel OPT 81 through Tie lines and then out ATT LD trunks. I can make a LD call from Cisco and it hits the operator on the Nortel.Any suggestions would be a great help. Thanks for the help Mike Patti

Anyone know what BUG6020 is? Not in any manuals that I can find.Have an opt 81 ver 3011 rls 25. Thanks for the help Mike Patti

That was exactly the problem thanks for the help. Thanks for the help Mike Patti

Anyone out there that could help me with Infortel I have set up with Nortel OPT 81 and all seems to work good except no internal calls recording? Thanks for the help Mike Patti

No sure don't, but thanks for the heads up Thanks for the help Mike Patti

Thanks for everyones help, I rebuilt the route and trunks exactly the way they were before and everything works fine I'm not sure this wasn't a Cisco problem. Thanks for the help Mike Patti

Tried that, still no good I think I will out route and re build and see if that takes care of problem. Thanks for the help Mike Patti

The TARG for route is set for 01. Thanks for the help Mike Patti

I tried the suggestions given and still no luck,I did some testing and found out that if you dial the ACOD and don't have a TGAR of 8 it also goes straight to the operator.Any other suggestions? Thanks for the help Mike Patti

TARG set 01 Thanks for the help Mike Patti

I have an Opt 81 and we have it interfaced with Cisco VOIP. The system has been working great, then all of a sudden we can't make calls from Nortel to Cisco, all calls go to the Operator.I have found that the only way to get around this problem is to change the TGAR to 8 on the Nortel ext. then...

We are going to run riser cable from one closet to another we have holes bored in floor to go from one closet to the next, do we have to have sleeves in the holes to run the cable through or can we just run cable without sleeves? Thanks for the help Mike Patti

Is there any way to reset the LDIC count for trunks without having to InI the switch? Thanks for the help Mike Patti

I would like to thank everybody for all the help after dealing with this all day I found out that this 800 number had to be enabled on the other end before it would work. Thanks for the help Mike Patti