Search results for query: *

<REG-CGWB; S3: DATA SUBSYSTEM FOR AMO CGWB NOT FOUND ON HARD DISK

Hi how i can pickup a call from trunk i have two system, elastix (5xxx) and Siemens Hipath 4000v3 (2xxx), connected by SIP Trunk. from Siemens, (77+Extension), Siemens extensions can pickup a call for other Siemens extension (only). 77+2xxx ----> OK 77+5xxx ----> Don't Work...

any error in COT of trunk?

<DIS-COT:101; DIS-COT:101; H500: AMO COT STARTED COT: 101 INFO: DEVICE: INDEP SOURCE: DB PARAMETER: PRIORITY FOR AC WILL BE DETERMINED FROM MESSAGE PRI RECALL IF USER HANGS UP IN...

nothing changed, forward on active call from 2882 (flash then number)to any extinction on elastix 5xxx, ok forward from 2882 using (AFWDEXIN) and ( AFFWDVCE) return Not Possible.

change COS for station and trunk to new COS???

<dis-feasu; DIS-FEASU; H500: AMO FEASU STARTED ACTIVATED FEATURES CRITM LDME SPDC SPDI HTVCE HTFAX HTDTE OVR FRKN NIGHT COSXCD COSXKEY DCOSX COSXATND COSXT COSXDP ICPTDID HOTRCL DND...

nothing change, not possible.

*141 |. ....* ..... ....* ..... ..| AFWDEXIN |

this is current configurations +------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+ | DEV = HG3550IP PEN = 1-02-009-0 TGRP = 4 | |---------------------------------------------------------------------------| | PROTVAR = ECMAV2...

usnig ADD-ACTDA work fine, but from the extension using code *141 not work, not possible

yes i can dial the number, i can only forward to internal number on Siemens, but i cannot forward to external number or elastix number.

Dears i have two system, Siemens hipath 4000 v3 connected to elastix with sip trunk unconditional forward from elastix -----> Siemens OK but unconditional forward from Siemens -------> elastix (return not possible)

how to view call logs in hipath 4000 v3

ODR for this route as 1 ECHOALL 2 END

how can i configure sip trunk to carry out dial number from elastix to isdn connections (elastix)>>>sip-trunk>>(hipath 4000 v3)>>>E1>>>(isdn) the trunk is configured but all out-dial numbers configured using dahdi trunk. hipath using pins to access out dial numbers

thanks

where i can find the mapping . number 9 convert to 7849 i need to change this number "7849".

how to change number mapping in hipath 4000 v3, if dialing 9 it mapped to 7849

it seems in cop or cot or cos parameter.?