Forwarding

[trtrtrtrtrtrt]

Dears
i have two system, Siemens hipath 4000 v3 connected to elastix with sip trunk

unconditional forward from elastix -----> Siemens OK

but unconditional forward from Siemens -------> elastix (return not possible)

 

[sbcsu]

From the HiPath can you dial the number that you wish to forward to ?
Can the phone forward to other external numbers on other circuits ?

 

[trtrtrtrtrtrt]

yes i can dial the number,
i can only forward to internal number on Siemens, but i cannot forward to external number or elastix number.

 

[sbcsu]

Sounds like the LCOSV is ok but the COS needs to be checked.

Also at

http://www.tek-tips.com/viewthread.cfm?qid=1750485

ADD-COSSU:,13,,,,,,,,"STD COS WITH EXTNL FWDING ALLOWED";
CHANGE-COSSU:COS,13,TA&TNOTCR&CDRS&CDRC&CDRIND&CDRINT&COSXCD&MB,,,,,,,;
CHANGE-COSSU:COS,13,DATA&CFNR&VCE&FWDNWK&TTT&RELCON&CFB&FWDFAS,,,,,,,;
CHANGE-COSSU:COS,13,FWDDIR&CFSWF&FWDECA&FWDEXT&CW&UUS3&ACTMAN,,,,,,,;
CHANGE-COSSU:COS,13,,TA&TNOTCR&BASIC&TTT&SUBMSN&MSN&MULTRA&KIESIG,,,,,,;
CHANGE-COSSU:COS,13,,,TA&TNOTCR&DSM&BASIC&TTT&SUBMSN&MSN&MULTRA,,,,,;
CHANGE-COSSU:COS,13,,,KIESIG&UUS1IM&UUS3&ACTMAN,,,,,;

 

[trtrtrtrtrtrt]

usnig ADD-ACTDA work fine,
but from the extension using code *141 not work, not possible

 

[trtrtrtrtrtrt]

this is current configurations

+------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+
| DEV = HG3550IP PEN = 1-02-009-0 TGRP = 4 |
|---------------------------------------------------------------------------|
| PROTVAR = ECMAV2 INS = Y SRCHMODE = CIR |
| COTNO = 101 COPNO = 1 DPLN = 0 |
| ITR = 0 COS = 47 LCOSV = 2 |
| LCOSD = 1 CCT = ”PLOPSTN” DESTNO = 0 |
| SEGMENT = 8 DEDSCC = DEDSVC = NONE |
| FACILITY = DITIDX = SRTIDX = |
| TRTBL = GDTR SIDANI = N ATNTYP = TIE |
| CBMATTR = NONE NWMUXTIM = 10 TCHARG = N |
| SUPPRESS = 0 DGTPR = CHIMAP = N |
| ISDNIP = 00 ISDNNP = 0 |
| PNPL2P = PNPL1P = PNPAC = |
| TRACOUNT = 31 SATCOUNT = MANY NNO = 1 -1 -10 |
| ALARMNO = 0 FIDX = 1 CARRIER = 1 |
| ZONE = EMPTY COTX = 1 FWDX = 5 |
| DOMTYPE = DOMAINNO = TPROFNO = |
| INIGHT = CCHDL = |
| UUSCCX = 16 UUSCCY = 8 FNIDX = 1 |
| CLASSMRK = EC & G711 & G729OPT SRCGRP = |
| TCCID = |
|---------------------------------------------------------------------------|
| BCNEG = N BCGR = 1 LWPAR = 0 |
| LWPP = 0 LWLT = 0 LWPS = 0 |
| LWR1 = 0 LWR2 = 0 |
| DMCALLWD = N DMCSEC = N VNNO = |
| SVCDOM = |
| BCHAN = 1 && 30 |
| |
+---------------------------------------------------------------------------+

+------+-----------------+---------------+-----------------+
| COS | VOICE | FAX | DTE |
+------+-----------------+---------------+-----------------+
| 47 |>47 WITH MB, GRPCLL, CFW INT NO ANSWER AND BUSY |
| | TA | TA | TA |
| | TNOTCR | TNOTCR | TNOTCR |
| | CDRS | BASIC | DSM |
| | CDRSTN | TTT | BASIC |
| | CDRC | SUBMSN | TTT |
| | CDRIND | MSN | SUBMSN |
| | CDRINT | MULTRA | MSN |
| | COSXCD | KIESIG | MULTRA |
| | MB | | KIESIG |
| | DATA | | UUS1IM |
| | CFNR | | UUS3 |
| | VCE | | ACTMAN |
| | FWDNWK | | |
| | TTT | | |
| | RELCON | | |
| | CFB | | |
| | FWDFAS | | |
| | FWDDIR | | |
| | CFSWF | | |
| | FWDECA | | |
| | FWDEXT | | |
| | CW | | |
| | GRPCAL | | |
| | UUS3 | | |
| | ACTMAN | | |
+------+-----------------+---------------+-----------------+


COT: 101 INFO:
DEVICE: INDEP SOURCE: DB
PARAMETER:
PRIORITY FOR AC WILL BE DETERMINED FROM MESSAGE PRI
RECALL IF USER HANGS UP IN CONSULTATION CALL RCL
TRUNK CALL TRANSFER XFER
ATTENDANT INTERCEPT WHEN VACANT IVAC
ATTENDANT INTERCEPT WHEN UNAUTHORIZED INAU
ATTENDANT INTERCEPT WHEN FREE (AFTER TIMEOUT) IFR
TRUNK SIGNALING ANSWER ANS
CHANGEOVER FROM HOLD TO RING TONE CHRT
KNOCKING OVERRIDE POSSIBLE KNOR
CALL EXTEND FOR BUSY, RING OR CALL STATE CEBC
NETWORKWIDE AUTOMATIC CALLBACK ON BUSY CBBN
NETWORKWIDE AUTOMATIC CALLBACK ON FREE CBFN
NETWORKWIDE CALL FORWARDING PERMITTED FWDN
NETWORKWIDE FORWARDING NO-ANSWER FNAN
REGENERATED CO DIALTONE ON OUTGOING SEIZURE COTN
DON'T RELEASE CALL TO BUSY HUNT GROUP BSHT
END-OF-DIAL FOR BLOCK IS SET BLOC
DESTINATION NUMBER WITH PREFIX DIGITS TO CDR DPRE
SEND NO NODE NUMBER TO PARTNER LWNC
ACTIVATE TRANSIT COUNTER ADMINISTRATION FOR S0/S2 LINE ATRS
CONNECTION TO ROUTE OPTIMIZATION NODE ROPT
INCOMING CIRCUIT FROM SYSTEM WITHOUT LCR NLCR
TSC-SIGNALING FOR NETWORKWIDE FEATURES (MANDATORY) TSCS
TRUNK SENDS CALL CHARGES TO ORIGINATING NODE NUMBER TRSC
CALL FORWARDING PROGRAMING FOR OTHER SUBSCRIBERS CFOS
CALL FORWARDING VALIDATION PROCEDURES POSSIBLE CFVA
SYNCHRONIZED ANNOUNCEMENT FOR PSM APSM
INCOMING CIRCUIT FROM SYSTEM WITHOUT LCR (DATA) NLRD
PIN NETWORKWIDE POSSIBLE PINR
AOC PER CALL (AUTOMATICAL OR ON REQUEST), MAND. CORNET-NQ AOCC
CALL CHARGE DISPLAY CDRD
B-CHANNEL NEGOTIATION (PREV. PREFERRED-PREFERRED COLLISION) BCNE
NPI ISDN, OUTGOING CALL NPIS
NO TONE NTON



------------------------------- USER DATA -----------------------------------
STNO =2882 COS1 =47 DPLN =0 SPDI =0
PEN = 1- 1- 3- 8 COS2 =47 ITR =0 SPDC1 =
DVCFIG =ANATE LCOSV1 =2 COSX =0 SPDC2 =
INS =YES LCOSV2 =2 RCBKB =NO
PMIDX =0 ALARMNO =0 LCOSD1 =1 HMUSIC =0 RCBKNA =NO
SSTNO =NO COTRACE =NO LCOSD2 =1 SPEC =
COFIDX =0 DIAL =VAR PULSTYPE= PULSLEV=
CCTIDX = ACKST = TEXTSEL=
DHPAR =
CONN =DIR FLASH =YES DTMFBLK =NO WITKEY :NO
------------------- ACTIVATION IDENTIFIERS FOR FEATURES ---------------------
DND :NO CWT :NO
HTOS :NO HTOF :NO HTOD :NO VCP :NO
--------------------- FEATURES AND GROUP MEMBERSHIPS ------------------------
PUGR : HUNTING GROUP : NO
NIGHT OPTION : NO
------------------------- STATION ATTRIBUTES (AMO SDAT) ---------------------
NONE
-----------------------------------------------------------------------------

 

[trtrtrtrtrtrt]

*141 |. ....* ..... ....* ..... ..| AFWDEXIN |

 

[sbcsu]

Try the code for AFFWDVCE

 

[trtrtrtrtrtrt]

nothing change, not possible.

 

[donb01]

Show us DIS-FEASU;


Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA

 

[trtrtrtrtrtrt]

<dis-feasu;
DIS-FEASU;
H500: AMO FEASU STARTED
ACTIVATED FEATURES

CRITM LDME SPDC SPDI HTVCE HTFAX HTDTE OVR
FRKN NIGHT COSXCD COSXKEY DCOSX COSXATND COSXT COSXDP
ICPTDID HOTRCL DND VARCONF TRACE SNR RKNOVR CBK
DSS SPLIT ONHKTRNS PU RSVCO SER DDTES ISTR
RNG TRACCO LEDSIGN VMSDP EMOVR EMRLS SYNCANN CDROGNW
CDROGTR DISCHNW DISCHTR LCRET POSTBUSY POSTFREE RELOCATE VOICO
HTNW PININT TIMEDREM ATTR CPS INCPRIO CALOGOPT DIRCPCKP
DCPA CLIP MOBHFA

DEACTIVATED FEATURES

NOCHRG WTATND RELCON RERING AUTOV DCBB DCBNOA CDRINH
CDRIC DISCHINH PINNW ECFW XFBACALL XFBADIAL CDRE NCT
RCCB MLPP CDRACC SMARTCRD SILMON

AMO-FEASU-111 CUSTOMER FEATURE LIST
DISPLAY COMPLETED;

 

[sbcsu]

Hi,
That COS 47 shows as

CFW INT NO ANSWER AND BUSY

Can you find a COS that works or add one as shown above and try again.

 

[trtrtrtrtrtrt]

change COS for station and trunk to new COS???

 

[sbcsu]

Hi,
The extension 2882 is set to COS1=47
In your setup COS 47 = CFW INTERNAL NO ANSWER AND BUSY

To change:
REG-COSSU:COS;
Find a blank/unused COS
In this example it is COS 13

ADD-COSSU:,13,,,,,,,,"STD COS WITH EXTNL FWDING ALLOWED";
CHANGE-COSSU:COS,13,TA&TNOTCR&CDRS&CDRC&CDRIND&CDRINT&COSXCD&MB,,,,,,,;
CHANGE-COSSU:COS,13,DATA&CFNR&VCE&FWDNWK&TTT&RELCON&CFB&FWDFAS,,,,,,,;
CHANGE-COSSU:COS,13,FWDDIR&CFSWF&FWDECA&FWDEXT&CW&UUS3&ACTMAN,,,,,,,;
CHANGE-COSSU:COS,13,,TA&TNOTCR&BASIC&TTT&SUBMSN&MSN&MULTRA&KIESIG,,,,,,;
CHANGE-COSSU:COS,13,,,TA&TNOTCR&DSM&BASIC&TTT&SUBMSN&MSN&MULTRA,,,,,;
CHANGE-COSSU:COS,13,,,KIESIG&UUS1IM&UUS3&ACTMAN,,,,,;

Then
CHA-SCSU:STNO=2882,COS1=13;

 

[trtrtrtrtrtrt]

nothing changed,
forward on active call from 2882 (flash then number)to any extinction on elastix 5xxx, ok
forward from 2882 using (AFWDEXIN) and ( AFFWDVCE) return Not Possible.

 

[sbcsu]

Well at this stage I would look at updating the system to the last release of the Version that you have.
Test again and if not resolved:
Escalate it to Unify for a resolution.

 

[trtrtrtrtrtrt]

<DIS-COT:101;
DIS-COT:101;
H500: AMO COT STARTED

COT: 101 INFO:
DEVICE: INDEP SOURCE: DB
PARAMETER:
PRIORITY FOR AC WILL BE DETERMINED FROM MESSAGE PRI
RECALL IF USER HANGS UP IN CONSULTATION CALL RCL
TRUNK CALL TRANSFER XFER
ATTENDANT INTERCEPT WHEN VACANT IVAC
ATTENDANT INTERCEPT WHEN UNAUTHORIZED INAU
ATTENDANT INTERCEPT WHEN FREE (AFTER TIMEOUT) IFR
TRUNK SIGNALING ANSWER ANS
CHANGEOVER FROM HOLD TO RING TONE CHRT
KNOCKING OVERRIDE POSSIBLE KNOR
CALL EXTEND FOR BUSY, RING OR CALL STATE CEBC
NETWORKWIDE AUTOMATIC CALLBACK ON BUSY CBBN
NETWORKWIDE AUTOMATIC CALLBACK ON FREE CBFN
NETWORKWIDE CALL FORWARDING PERMITTED FWDN
NETWORKWIDE FORWARDING NO-ANSWER FNAN
REGENERATED CO DIALTONE ON OUTGOING SEIZURE COTN
DON'T RELEASE CALL TO BUSY HUNT GROUP BSHT
END-OF-DIAL FOR BLOCK IS SET BLOC
DESTINATION NUMBER WITH PREFIX DIGITS TO CDR DPRE
SEND NO NODE NUMBER TO PARTNER LWNC
ACTIVATE TRANSIT COUNTER ADMINISTRATION FOR S0/S2 LINE ATRS
CONNECTION TO ROUTE OPTIMIZATION NODE ROPT
INCOMING CIRCUIT FROM SYSTEM WITHOUT LCR NLCR
TSC-SIGNALING FOR NETWORKWIDE FEATURES (MANDATORY) TSCS
TRUNK SENDS CALL CHARGES TO ORIGINATING NODE NUMBER TRSC
CALL FORWARDING PROGRAMING FOR OTHER SUBSCRIBERS CFOS
CALL FORWARDING VALIDATION PROCEDURES POSSIBLE CFVA
SYNCHRONIZED ANNOUNCEMENT FOR PSM APSM
INCOMING CIRCUIT FROM SYSTEM WITHOUT LCR (DATA) NLRD
PIN NETWORKWIDE POSSIBLE PINR
AOC PER CALL (AUTOMATICAL OR ON REQUEST), MAND. CORNET-NQ AOCC
CALL CHARGE DISPLAY CDRD
B-CHANNEL NEGOTIATION (PREV. PREFERRED-PREFERRED COLLISION) BCNE
NPI ISDN, OUTGOING CALL NPIS
NO TONE NTON

AMO-COT -111 CLASS OF TRUNK FOR CALL PROCESSING
DISPLAY COMPLETED;

 

[trtrtrtrtrtrt]

any error in COT of trunk?

 

[sbcsu]

You will need to add back in
ATTENDANT INTERCEPT WHEN VACANT IVAC
ATTENDANT INTERCEPT WHEN UNAUTHORIZED INAU
ATTENDANT INTERCEPT WHEN FREE (AFTER TIMEOUT) IFR
as locally required in the COT


ADD-COT:10,RCL&XFER&IFR&ANS&CHRT&CEOC&CEBC&CPS6&IEVT&BSHT&LWNC&NLCR&CECO&ICZL&ICZO&DFNN&NLRD&CDRD&DSDL&CTLS&CLNA&CLNO&NTON;
ADD-COP:10,RMSG&RRST&DTM1,TA,TA;

CHA-TDCSUEN=1-2-9-0,COTNO=10,COPNO=10,COTX=10;

However at this stage I would be doing traces on the circuit and asking the PTT to assist you with same.