Search results for query: *

You are getting super close...you have a VPIM index entry issue in callpilot or Unity Make sure in Callpilot you have the Unity site build and with the right VPIM index On the Unity side they have to enter the VPIM index as well. Run SMTP traces on both boxes. make sure you are sending...

Yes as a matter of fact I do You need to set up the VPIM prefix for the call pilot site, adn for the cisco site (Different VPIM prefixes) Make sure you have good FQDN for both sites ( you need to be able to ping by name back and forth) Make sure port SMTP 25 is open ( telnet to that port to...

VPIM uses SMTP, but I would not know on how to integrate that with UM.

You are right, sad but true. I remember on OTM Nortel used to have a little utility that will help clean up these type of issues. I wonder if it will work on TM 3.0

I'm not having whole lot of luck with TM3.0 but Do you know that they have a couple of patches for TM already

We were able to make VPIM work from the CallPilot Box into the Cisco Unity voice Mail. We had to tweak the SMTP/VPIM index and the overlap. However We are still unable to receive messages from the Cisco Unity. Do you know if call pilot has any tracing tools, where I can see the digits that...

A more expensive solution would be to install a follow me card (ICD)

...captures of all screens (this will come in handy once you are ready to reneter information) Take screen captures on your Elan and CLAn Nics ******Reinstall the same languages you had before, If you had portugeze you need to reinstall it. You need to reinstall the same languages you had...

We got it. We needed to put an access code on the virtual route,and redirect the analog lines to the access code + an extension (in our case the Auto Attendant)

It is not working. When my phones are in normal mode, you do not see the assigned lines (The phone becomes a CS1000 phone) We are still struggling with this thing.

Nortel 5.0 ( May/June) you will be able to synch your time to a NTP server. Otherwise like John said ld 2 is your answer.

Dear Nortel Gurus I have an SRG 50 hanging off of a CS1000s, with 4 analog trunks on the SRG. I was able to get the outbound working on the SRG. I need your help with the inbound. I need a step by step on what is the trick for making the inbound workin on the SRG. Thank you

Have you patched your call pilot lately, if you did you might need a different version of AppBuilder

You should schedule 6 to 10 hours to do this. The proper way to do this will be to do one core at a time card cage, clock controllers, and FIji. Make sure everythging is working on that core, switch, do the second core then join. (downtime will depend if your system is AC or DC) Good Luck

Thank you all it worked.

But I thought If I cannot add it through element manger I won't be able to work on it through element manager (update software). I'll try it tomorrow morning and I will let you all know. Thank you all for your help.

How do I reinstall the software to the Compact Flash card ?

I'm adding a VGMC card to a CS1000 4.5 using element manager and I get this error "cannot FTP to card" any work arounds that you know of, or is this card bad ?

Thank you all for the feedback. We had to change the Route Dsel to 3VCE and everything is working like a charm. Thank you again.

Any thoughts on the question below ? I appreciate it. I could not set up D4 or SF on option 11 (TMDI card NTRB21AC)The closest thing was AMI/D3. Enen GNTS could not get D4 or SF on the config. As soon as I tell it AMI it Does not give me an option to choose my framing. Any thoughts. When I use...