How do I make the inbound anlg trunks work on an SRG

[Tippman71]

Dear Nortel Gurus

I have an SRG 50 hanging off of a CS1000s, with 4 analog trunks on the SRG. I was able to get the outbound working on the SRG. I need your help with the inbound. I need a step by step on what is the trick for making the inbound workin on the SRG.

Thank you

 

[biv343]

Not much magic to it if the phones are already redirected. Assign the line you want to ring to the local mode set. When the set is redirected, the line that rings in local mode will also ring in normal mode.

 

[Tippman71]

It is not working. When my phones are in normal mode, you do not see the assigned lines (The phone becomes a CS1000 phone)
We are still struggling with this thing.

 

[Tippman71]

We got it. We needed to put an access code on the virtual route,and redirect the analog lines to the access code + an extension (in our case the Auto Attendant)