Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Daniel_RO

    IPECS eMG80 Rotary Phone and Pulse Dialing

    unfortunately with the eMG and UCP systems, ELG has implemented license based firmware upgrades. Really great when you need a bugfix from a latest firmware, but customer is out of license. I think at v2.0Bc you are too far gone on that system to be able to use a demo license to get the firmware...
  2. Daniel_RO

    changing IP for SV9100 NetLink Connection

    I had a customer IT change the subnet of the network without any thought towards the devices on that network outside of what was in their control, so yeah, I have tried this before, and had to act quickly to get customer voice services back online.
  3. Daniel_RO

    add new ip phone extension using Webpro not PCPRO

    doesnt appear you can without first activating the port. You could attempt the same method as above, adding the extension number in 11-02, and attempting to register without a password, then once registered, configure in 15-05 with password for security, however I believe this still wont work.
  4. Daniel_RO

    Night service button

    to program a button for night mode, 15-07 - Pick a blank button, set to 09, and put 0 in additional data. 12-07 - Give modes a name 12-08 - Tick 'Lamp Settings for Toggle Key' This will give users a single button to press for day/night switching, which illuminates when the system is in night...
  5. Daniel_RO

    nec sv9100

    Those documents in a nutshell. Submit SKC to NEC for migration, they will ask you to generate the Feature Activation License and System Data reports. So I tend to give everything in one hit. Download Database in 8100 PC Pro, Save, Open in 9100 PC Pro, this will migrate all your data. Ensure...
  6. Daniel_RO

    changing IP for SV9100 NetLink Connection

    Changing IP details on a Netlink is fairly simple. 10-12, update IP details in here, new IP/Gateway etc 84-26, update IP details in here, to ensure your RTP traffic continues routing This is your base IP information on each system, once you have this setup 51-03 - Update IPs for each other...
  7. Daniel_RO

    Last known firmware for NEC IP DECT G266 and G566 handsets?

    Check your DMs
  8. Daniel_RO

    Different Night Messages

    Did some testing and have managed to make the above work. Thanks Cody64 for this. Wasn't even aware this was an option in the system. Gives me another feather for my cap, and I can use it moving forwards too. Pity we cant do a flex key to select the different modes.
  9. Daniel_RO

    Different Night Messages

    Hey Guys, Have a customer with emG80, theyre wanting 4 different messages and being able to select them independently from a handset before they leave for the night. They have recorded said messages from the trans/pgm 0, 6, 002, and using messages 1-4, however when going through this process...
  10. Daniel_RO

    3300 cx ii new disk

    Have the software from the server, have the migration manager as well for future use (and feel I may need it for this too based on Handbook), however, one of the first steps states to ensure you have the LAN IP of the Mitel. From Console, I can see on the boot script inet on ethernet (e) ...
  11. Daniel_RO

    3300 cx ii new disk

    Thankyou Hemonious, this is exactly what I was looking for. Never knew there was a technicians handbook, and couldnt find a I&A Manual like NEC call it, or installation manual like ipecs calls it, or installation handbook like toshiba call it. LOL
  12. Daniel_RO

    3300 cx ii new disk

    Hey Guys, As stated before, I am not overly familiar with the mitel platform. I have done the certification and passed so have access to the portal, but real world experience is lacking. As a result, I have gotten my hands on a 3300 cx ii, unfortunately, the Hard Drive that was in the system...
  13. Daniel_RO

    Beep at start of SIP Calls on IP Handsets

    Changed the RTP Alarm, and unfortunately it hasn't resolved the issue. But thanks for the idea as it is something we hadnt tried before. Back to the drawing board I guess.
  14. Daniel_RO

    Beep at start of SIP Calls on IP Handsets

    Thanks for the tip @DoubleDriveLine, when I got back to my office, I setup an IP phone against my dummy system and found the setting you were talking about in: Press the 'Menu' button near the directional pad in the bottom right of the phone Go to 'Setting' Go to 'User Setting' Go to 'Talk' Go...
  15. Daniel_RO

    Beep at start of SIP Calls on IP Handsets

    Hey Guys, Random one that has reared its ugly head for me to play with. Customer has SV9100, CP20, with DT800 IP phones. Randomly, on incoming calls, staff will answer, and at the start of the call they will hear a beep which can block the customers voice etc from being heard, so it is...
  16. Daniel_RO

    Activating NEC SL2100 Temporary License Failing

    If the system is straight out of the box, you can register the CPU in LMS and activate one of the demo licenses from in there. Even if its not brand new, you can still grab demo licenses from LMS for the life of the system. As for 90-57, this was changed from 90-36 on the 2100, so both program...
  17. Daniel_RO

    UCP600 Emergency Calls

    I managed to figure it out for anyone that was interested. PGM 270, Table 1 Apply time was unconditional Dialed Digit was 000 Changed Digit was 0000 Apply Option was Station PGM 111 Under Tone / Ring Attributes, Index 9 Apply Table 1 to extensions required. Doing this means that anytime...
  18. Daniel_RO

    UCP600 Emergency Calls

    Hey Guys, Have had a customer request a change from 0000 (0 for trunk then 000) to be changed so they only need to dial 000 in case of emergency. (000 being for emergency calls in Australia) I have added 000 to the Emergency Code Table in PGM226, I have attempted to do Digit Conversion in...
  19. Daniel_RO

    IP DECT Diagnostics Mode

    Hey Guys, Not overly familiar with Mitel, have done the training but this is something a lil more niche. Does anyone know how to set a IP DECT Cordless to diagnostics mode so that we can complete an audit of the DECT system.
  20. Daniel_RO

    NEC SL2100, I need to program a button that forwards the main number to my mailbox

    OK, in 12-07 setup a third mode, rest of the programming above is still relevant for this, just in a third mode instead of the 2nd. When setting up buttons, you can setup a key that only switches mode 3 on, then their normal day/night switch will switch it back to day. If their lunch is the same...

Part and Inventory Search

Back
Top