Search results for query: *

So how can I set the communicator to just be a standalone SIP softphone to make and receive calls? I can't see any option for this in the settings of the communicator.. Thanks

In all honesty I was expecting a response on Monday morning which is prob why the response threw me... The communicator is being used as a sip softphone alone with no deskphone. When we log in with one-x portal as well as the communicator the one-x portal rings but the communicator does not...

Thanks for that, Just the answer I was looking for....

Hi, We are having issues receiving internal and external calls on a user logged into a communicator softphone, the call goes straight to voicemail or if voicemail is not configured just times out. Outgoing calls from the communicator work just fine. When looking at the system status the user...

thank you - I will check my settings against these and see where the issue lies.

Hi, I have set that up but it is not doing what I am expecting it to.. I was hoping to see some screenshots or output of a working scenario to compare against Thanks

Hi, Yes - perfect sense. Can you detail how you have the routing setup on the FXS side for outbound calls from the MP as this is what I can't get working? Thanks

Hi, Thanks for your response. We are using the mp112 FXS for fax, PDQ and dect devices. Thanks

Hi, Sorry for late response.... I managed to find the files to convert to H323... Looks like the mp112 uses the mp118 files. I have managed to get inbound calls to the mp112 working although outbound is different story... Can you post your outbound configuration so that I can compare?? Thanks...

Hi, I seem to have found the firmware for mp118 and mp124 but no sign of any mp112 h323 firmware.. would you be able to get it across to me? thanks

Hi, I have found version 5 on the net, is this the latest H.323 version do you know? Also, I can't seem to find the process to convert from SIP to H.323 anywhere (how to load the H.323 firmware) - do you have the process for this? Thanks

Hi, We also have the MP112-FXS but it has been shipped with SIP firmware - does anyone know where I can get the H.323 firmware from? Thanks in advance

I think you will find that the IP needs to be changed in the system's /etc/hosts file but could be wrong

Hi, I am deploying an avaya aura messaging solution and I have a question which is more to do with the routing of calls to VM rather than the VM itself. Is it possible either by putting a step in a vector or by using coverage paths to check the status of VM to make sure it can handle calls ok/...

It should be the slot which houses the DS1 so in your case V2.

DMCC - Device Media Call Control

I always find the best way to do this is to ask the client to place USB stick which has the firmware in a specific folder into the G450 (if possible)and then you can copy the files from the USB to which ever boot bank you require. For instance if you place you file in a folder called AVAYA on...

Hi, We are not using CLAN's here as we have no G650's, we are just registering everything to PROCR. Should we have to upgrade the main to 5.2.1 as ESS servers should work ok when running a CM level the same or greater than the main?? Thanks

Hi, I am having issues with my ESS which is as follows: I have CM running 5.1.2 (S8510) and a ESS running 5.2.1 (DL360G7), normally when using 5.2.1 when you configure the survivable processor you have the options to allow H.323 and H.248 registrations but i do not have these options on my...

Hi - thanks for your response but I am running CM6 on a G450 and have the correct service packs/firmware installed for this to be able to work.