ESS issues

[wontwork]

Hi,

I am having issues with my ESS which is as follows:

I have CM running 5.1.2 (S8510) and a ESS running 5.2.1 (DL360G7), normally when using 5.2.1 when you configure the survivable processor you have the options to allow H.323 and H.248 registrations but i do not have these options on my 5.1.2 meaning that when my IP Phones and Media Gateways failover to my ESS they cannot register!
I can manually go into the ESS and enable these via the 'cha ip-interface procr' command but as soon as my translations are copied across from the main server this is removed!!
Does anybody know how to do this on a 5.1.2 CM??
We are using PROCR here as we have no G650 cabinets in out environment.

When we have failed over to the ESS (by doing a manual config) it seems that any IP Phones which were logged into any skills could not re-register to the ESS - does this sound familiar to anybody as i do not believet that this is correct?!?

Also, i have configured the CMS to failover to the ESS within the survivable processor form but when the ESS takes over the CMS does not register to the ESS, i believe that when the CMS to registers to ESS PROCR we need to set this form to inherit the config - is this correct??

Any help is appriciated
Thanks

 

[AvayaTier3]

upgrade the main to 5.2.1
until then registrations should stay with clan boards. The ESS will control the clans if there is a failure with network
from the main server.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[wontwork]

Hi,
We are not using CLAN's here as we have no G650's, we are just registering everything to PROCR.
Should we have to upgrade the main to 5.2.1 as ESS servers should work ok when running a CM level the same or greater than the main??
Thanks