Search results for query: *

thanks for the tip...i'll be back on-site tomorrow and check it out. I'll let you know what i find.

We have one file server connected to a Linksys SRW2024. It is connected by fiber to two Linksys SRW2024's and 2 SRW248G4's. We have excellent, normal transfer speeds on all computer/switches that have a one gigabit connection. On the 248g4's, we get strange lags. Sometimes 100MB file transfers...

I'm using an FXO interface on the trixbox to connect through the norstar (ideally). I am fairly proficient with trixbox, i just don't know what i need to do to make it work w/ the norstar. Further research has led me to understand that i may not be able to do this since norstar uses proprietary...

I have a client with a 20-year old Nortel Meridian KSU. I am trying to implement a trixbox asterisk server, but for now the transition needs to be seemless and this would best be achieved by dialing out through the ksu, if possible. If this is possible, how do i do it? I don't think i can just...

will do. thanks for the pointer

I have a client with a 20-year old Nortel Meridian KSU. I am trying to implement a trixbox asterisk server, but for now the transition needs to be seemless and this would best be achieved by dialing out through the ksu, if possible. If this is possible, how do i do it? I don't think i can just...

Is it necessary? can i stop it?

That was the first thing I checked. they are all specific addresses.

That's kind of an odd thing, it doesn't mention any port.

I've been running Network Monitor on my servers lately to try to clean up my network and have found that my IP406 is sending out a series of 10 or so broadcasts every few seconds. Are they bootp? If so, can i disable it? The Hex details have IP 406DS at the end and the Frame details mentions...

I installed the new sentinel drivers mentioned above, and the feature server stopped recognizing the dongle. Now i can't find the old drivers. Anyone know where these are? i repaired the install off the admin cd w/out success.

Well, now i understand why the server was plugged into the IPO when i arrived. I changed the setup because i wanted a gigabit backbone. I have a linksys 2024c switch, is there some way i can make this work?

I couldn't get Feature Key server to recognize the dongle, though the sentinel drivers worked, so i kept using the old server.

It's Rainbow USB Superpro. Are the correct drivers from Sentinel? I installed a new x64 server here, with the intention of transferring the phone services to it. I had difficulty with the Feature Key Server after installing the drivers from safenet-inc.

The feature server icon is red.

That's an excellent point, thank you. It is silence, and i have had issues with licensing. Currently, though, the dongle number appears correctly in the system tab and the licenses appear as valid. When i had issues with licensing before, i changed the license server IP from the specific ip...

Nope, as far as i can tell, everything is fine on the server. I'm pretty good with servers (that's my field), it's just the phone system with which i'm inexperienced. The server is running other services without a problem. I assume i'm missing some obscure setting somewhere, as usual.

I'm having intermittent connection loss between IPO and the pc running VMPRO. I've checked and rechecked all of my network settings. It will work for a few hours and then stop working. Often a server restart will cause it to stop working. The licensing appears to be ok, as do the passwords...

I've just come in and taken over a school with and IPO system installed. I've upgraded to the latest releases of VM, Manager, and IPO FW. When a user dials out, a tone can be heard at the press of the Short Code, but the first digit of the phone number is silent. This has been an annoyance, and...