Search results for query: *

The second SPS does not start. The navi manager shows it as not present. There are no lights on the SPS. I tried powering down and powering up and checked the cables. they seem to be fine. Is there any way to fix this. The second SPS seems to be working fine. thanks mabu

the reason that I was seeing just one lun as opposed to all three luns was because ATF was wrongly configured. When I run ATF_Console I get [2/21/...] Usupported Array. I can't find any messages for the ATF in the event viewer. I tried unistalling everything and reinstalling everything but...

Hi, I have created a storage group and added three luns(raid5) to it of sizes - 995 gb, 212gb, 500gb. But in windows, when I check the Disk Management MMC, i can see three drives, but all these drives are of 995gb. Shouldn't I be seeing just one drive with 995+212+500 gb of space. Or should i...

Hi figured out how to deregister the HBA. Thanks Mabu

Hi The manager shows that the last three disks on DAE 3 has errors. Plus the active and fault lights on the DAE for these disks are all off. Is there a way to fix this problem. Your help will be greatly appreciated Thanks. Mabu

thanks Comtec17. I got it to work. But I haven't been able to deregister the HBAs. Is there any way to do this in the manager, navicli or through FCLI? Mabu

I think I figured out my problem. Somehow the wwpn and wwn of hba changed. I am not sure how, but I think it is because I re-installed the host agent. I am going to try to add the HBA again and see if that works. Btw, is there any way you can deregister a HBA from the storage device? I am...

Hi, I am trying to configure Clariion 4500 with Navisphere manager 5.3. I have created raid groups bound luns and created storage groups. I am able to see the lun on both device manager and Disk management MMC, but the Luns appear as Unreadable and Unkown. I am not sure what I am doing wrong...

Comtec17 It is a Clariion FC 4500. Thanks Mabu

Hi, I was able to bind disks into luns but I think my problem is that I do not have any storage groups assigned. It would be great if someone tellme how I can do this through Fcli. Rigth now, I can see the array in through the management server but I see the whole 25terabytes and don't see...

Hello All, 2 questions. 1. How do I set the FC 4500 to factory default settings? 2. Is there a way to deregister a hba through fcli? Your help will be much appreciated. Thanks mabu

Thanks Maultier, I found out that the sectors size is 520 so must not be jbod. I have an emulex hba directly connected to the server. No switches installed for now. More questions for you 1. I don't have powerpath or other ATF applications installed could this be the cause of my problems? 2...

Thanks maultier, But I have a few more questions regarding this new scenario. 1) is a jbod connection better? 2) Can you connect the Serial Cable to PRI interface and create a serial connection to the DAE? 3) How do I set the block length to 520? Is formatting the only option? 4) How can I...

I just noticed that the Block length on Lun 0 is 512. Is this the setting for JBOD Configuration? Thanks Mabu

Hi, Maultier i looked around in the emulex website, but could not find any thing about emc code for the controller. For now, through HBA anywhere I see the whole San storage device, 25 terabytes as one lun. Thanks mabu

Thanks Maultier and Comtec17. I downloaded and installed AutoPilot Installer from Emulex website. I followe Hidden75's instruction on FC-4500/Navisphere 6.X post and changed my agent.config file accordingly. Can you tell me what landevice, and "device \\.\SCSI4:0:0:0 CD_2342787141 "DGC...

Hello all, I was able to get to the FCLI Prompt with Maultier's Help. I used Hyperterminal with 9600-8-N-1.But I have been stuck and haven't been able to move from there. Here is what I did so far. -- Installed two Emulex HBAs on to a machine with Win 2003 and connected to the SP with...

Thanks Maultier. Really appreciate your help. I am going through the document at the listed url. I hope i will get everything figured out. Thanks mabulal

I was able to get to the Menu through hyperterminal @ 9600-8-n-1. Thanks maultier. the null model cable was probably bad. I looked aruond in the menu, but I don't know how to set the ip addresses for the SPs. I see there is a ethenet menu but there are no options for setting the ip. I belive...

Thanks maultier. I tried hyperterm through serial connection and set it at 96-8-none-1. Using a null modem cable. But everytime I do a sequence of shift 2 and shift 4 sequences, the hyperterminal hangs. (I am assuming shift 2 = @ and shift 4 = $) I tried other baud rates too but did not get...