Search results for query: *

Hi All, Vodafone informed me they use 5065 not 5060 for some reason. I have had a sipgate trunk working in the past and currently have a CNET trunk which is still working although it uses UDP port 5062. IP Route is set for LAN 2 - or do I need to setup a specific route for vodafone John

hi derfloh Where would I find that please John

Hi All, Connected to the public network via Lan 2 - router on 192.168.2.2

Hi All Thanks for feedback The standard Firewall : - ---------------------------------- Custom Firewall for UDP : Help for custom says IP Protocol The value entered here corresponds to the IP Protocol which is to be processed by this Firewall profile: 1 for ICMP, 6 for TCP, 17 for UDP...

Thanks sizbut Tried bits of each application notes (picking the parts that seem to match) - but still not registering. John

Hi derfloh System status shows it as not registered. Have attached monitor printout for the attempts to connect. Cheers John ----------------------------------------------------------------- 15:13:22 271140mS Stun: STUNUdpClient TX: (this=0xf4ee1fa4)...

https://files.engineering.com/getfile.aspx?folder=3e5b1212-af88-41b6-b811-f4e6822b545a&file=monitor.txt

I'm slowly coming to the conclusion Vodafone are using their own version of SIP/VOIP which is not compatible to industry standard - anyone else had similar issues

Hi I am trying to setup a SIP/VOIP trunk from Vodafone on my IPO500v2 but unable to get it to register. Any help would be appreciated, thanks in anticipation. The info they have provided - Product information for VoIP Username / Password voi001903524 / xxxxxxxxxxxxx SIP proxy...

Hi All, The UPS runs the IPO together with a Desktop PC, IP Phone and Decserver - no problem with any of the other devices. I will bypass the UPS and if problem persists change the power supply in IPO to see it that resolves issue. Thanks

I have a IPO 500v2 system which restarts periodically. It has a APC UPS providing it's power together with some other IT components. Getting following message on Monitor Alarm Log Date: 09/11/2021 17:47:54 Reason: Abnormal Termination Termination Cause: <BROWNOUT> addr=00000000 d=0 pc=f00badb0...

Hi ipohead They have not said what is compatible, other than the v9.0 is not. I am trying to understand the different levels of the application running on the different IPO platforms. Unsure if they are trying to sell me their own telephony platform. Changing to V11.1 may be too expensive as...

Hi All, I have a IP500v2 running 9.0.4.0 build 945 with Wave (4) - CTI Link Pro (255) licenses However a software supplier says they are not compatible with their application. Are there different versions of the software running on IPO Thanks in anticipation

Thanks Guys whats a remsider remote phone Please can you explain SBC

Thanks Guys, I use mobile twinning for my own DDI extension which works fine. We have 100+ DDI numbers used by different clients and need to be identified before calls are answered in that clients name. I tried the 9650 which I think is One-X but could not get it to work over the internet or...

IPO Ver 9.0.4.0

Hi I am trying to setup home working during this covid crisis - have tried 1616 - 9650 but without success - would a soft phone work - what would I need. IPO500v2 Any help would be appreciated

Hi All, hope you can help. I am trying to setup remote working into my IPO500v2 9.0 using either 1616 phones or a 9650 I recently purchased for the purpose. What needs to be setup on the IPO WAN and the setup on the 9650 as I suspect the 1616 will not work. Does a VPN need to be setup on the...

I am in a similar position, needing to setup home working with IPO 500v2 running v9.0 - We have 50 endpoints - what phones should I use or can I use a PC phone, will additional or special licenses be needed. I have a few 1616 phones, will they work Any help appreciated

Thanks ShaunE will have a read.