Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by yuasa

  1. yuasa

    Mounting Brackets

    REFURB Supplies once again with their super and personal customer service solved this problem. They have even desigend a special "custom" wall bracket that will allow you to break off the ends to accomidate any unit from the big ones to the small and still keep them in the correct space order.
  2. yuasa

    R.1 AA saying "Station XX Not Available"

    This is the old box on the wall Partner Mail PM04 series. Is this possible in this series?
  3. yuasa

    PRI DID Station Programing

    ONe of the other members was nice enough to help me with this issue without a lecture.
  4. yuasa

    PRI DID Station Programing

    Jeffkoech are you this forums monitor?
  5. yuasa

    NAM with copper ports

    Thanks Brian. Then I route all VM traffic to the DN ( in hunt ) of my choice or has the VM DN on the NAM already been preassigned?
  6. yuasa

    PRI DID Station Programing

    I am asking for help not opinions. If you are not interested in helping then please do not bother replying witha flame.
  7. yuasa

    PRI DID Station Programing

    Yes, thank you. XO is sending DTMF 4 digits down teh PRI. What function code or location will I find Target line programming in. I have worked in the DID enviromet before just never in the Meridian line.
  8. yuasa

    MICS & NAM with PRI

    This is the first time I have worked on a T-1 on a MICS. I have located the T-1 RJ45 port on the card in the KSU. I confirmed with the customer that this unit was connected to the previous T-1 and that it had a PRI with 40 DID's. I need instructions now how to progam the new PRI and how to...
  9. yuasa

    PRI DID Station Programing

    I already know how to program the system this is the first time programming PRI DID's
  10. yuasa

    PRI DID Station Programing

    Have confirmed that this MICS will support PRI DID. Installed the T1 to the KSU. Telco has 40 DID PRI's coming in over the span. What are the program instructions for routing each of the seperate incoming DID numbers to each specific station?
  11. yuasa

    MICS & NAM with PRI

    Yes, both have the fiber cable. There are two fiber ports on one card. There is one vacent 25 pair AMP on the MICS with an icon of a telephone pole. I assume that is were the copper service terminates if I remember. Theonly sets I have worked on before are the 7310's. The M08 is therefor...
  12. yuasa

    MICS & NAM with PRI

    Thanks! I will get the versions for you as soon as I have it mounted and get it on line. In the meantime here is what I have MICS, NAM, MOX8 & MOX16. I don'r work on these most of the time so can you let me know what the MOX8 and MOX16 are. I assume they are the station and telco interfaces...
  13. yuasa

    Mounting Brackets

    This old MICS that has a missing mounting bracket for the NAM any place I can buy one?
  14. yuasa

    MICS & NAM with PRI

    I will check. The customer deinstlaled it and now I have it to reinstall. He wants DID so I am thinking the best way is to just get seperate B1 lines and route them to each station. No answer they will get voice mail or I can have them overflow to another station if the line is busy ot no...
  15. yuasa

    MICS & NAM with PRI

    Well lets see if this will be deleted. So I will try again. Can an older MICS with a non fiber NAM accomidate PRI 2 way DID service or only analog trunks?

Part and Inventory Search

Back
Top