Recent content by wideawake12

Thanks bhassell2000 and bigindian65 for your info and will keep you inform as to what happens.....got an email this morning to hold off on checking power supply. I know that they will have me check it but went??????????? Once again THANKS

I have a spare P.E. power supply and I've been task to check it out to see if it's operational. I have a CS1000M Rel 4.5 and the only way I know how to check it out is the power down a shelf and install the spare power supply. Should I disable each card or just disable the whole shelf. This...

I have 147 down and that's been that way since 2000.....no problems and no program required....just like Jeffnortel

Added key then cfw 4 and the extension......call forward is working fine and I have a happy supervisor. bigindian65 your post did the trick....thanks again for all your help....actually the whole forum has been helpful.....thanks again to all. Wideawake12

This is the TN for were I would like to put the CFW key with a pre-determine number- key 1. CFW is 4 for we only have a 4 digit system. TN 20 1 1 1 DATE PAGE DES DES CONFRM TN 020 1 01 01 TYPE 2008 CDEN 8D CTYP XDLC CUST 0 FDN TGAR 1 LDN NO NCOS 12 SGRP 0 RNPG 0 SCI 0 SSU XLST CAC_MFC...

Forgot to mention that I'm trying to program this on a 2008 set.

Programing CFW. This person wants to be able to press the CFW key and it will automatically go to the pre-determine number. Is it possible to do this. I'm able to program the CFW but when I enter the ext number I get SCH0356. Would appreicate any help and thanks in advance.

GHTROUT and Morenot Thanks for you info.....will pass on to management????? Thanks

I been task to install a digital phone on copper and the distance is over 4000ft do I need to purchase different DLC's. In the switch right now is NT8D02GA Rel 07. What do I need????????? Switch is CS1000M CPIV Thanks

You are the walking NTP.......great info...Thanks

GHTROUT, Once again thanks I just followed the book and it worked like a charm. Everyone is happy with the ringing. Thanks Wideawake12

Thanks GHTROUT. I have pkg DRNG 74 and FTC 125. Made the following changes to Route 99 in LD 16 DRNG = Yes NDRI = 2 This distinctive ring is to short and quick and won't work with fax How do I change the NDR2 PBX 002 to read 004, is this done in LD 56 if so how. Thanks for your help.

Can I ask a question in this tread for I'm trying to do the same thing. Distinctive Ring on my route 99.

Congrats GHTROUT and thanks for all your info.....your help has been invaluable many times....thanks again!!!!

telebub and johnpoole, Did what both of you told me plus I reseated the card on the back plane and now I'm up and running on that tty port. Your help has been much appreciated and for that I've given both of you a star. Keep up the good work. Once again thanks for the help.