Recent content by Slider55

I'm in the same boat...got my CCNA and now working on the ICOMM v8 for ccna voice, then planning to take ccnp voice, it has 5 courses. ICOMMv8 is a combo course, an overview of call manager express, unity express, call manager, unity voice mail and basic administrator functions. Hope this helps

No this has never been resolved, still a major issue with the dispatcher not being able to know who is calling. CLID gets to the ICP but wont pass it.

Does anyone know what could be blocking the phone from reading an 1140e.prv file from the default web directory on a Win2003 server TM 3.2 machine? I'm using "http://ip address of the TM3.2" provisioning. I have the fire wall off. The http provisioning works if I'm using my work station...

Well I finally got it working and as it turns out the problem with this was on multiple levels. First I discovered that port 69 was being blocked when I downloaded a TFTP client and used the solaris tftp software to transfer files between computers manually. After turning the firewall off in...

Sounds good I'll try a capture to ethereal but I'm not sure where to look once I get it captured...can you help with that info? I'm also downloading the solaris tftp as a fallback, I just really wanted to make the http provisioning work. That would be sweet for this new install.

Yes I'm using C6R at the present time and I have option 66 built in the same dhcp scope the phone gets its IP address from. This is the 172.16.115.x scope. I used a string value of "http://172.16.115.77" (without the quotes). I let my laptop get an address in the same range, I was able to brouse...

I'm trying to get my 1140E to read the system.prv file using my TM 3.2 win 2003 server for the http server. The phone trys to boot, retrieves the Option 66 ie...http://172.16.115.77 information from the dhcp server and then the phone trys to get a cfg file(I think from LLDP being set to yes by...

Well to answer your question on how the IVR ports are configured I can't say because I didn't set them up. All I can say is that they are going to a new ICP system. Nortel came in and set the system up. I will ask them and get back with you. Thanks for the heads up.

Thanks I'll give that a try and let you know...:-)

I have a 3.0 system that we need to configure ESA and OSN. What all do I need to configure to make this work? Thank you for the help.

I have a CS1000E with PRI for inbound and outbound calls to the PSTN. I'm having trouble with inbound calls to a DSC 8000 via SIP route/trk to an ICP (IVR) system. The IVR gets the CLID information from the call but when the call is later transfered to an ACD queue (M2616 agent), the agent...

Oh so you met her before...its a good video but way to quiet don't you think, she speaks very softly? I was wondering if there is a way to make the SCS reboot without having to go to the site to boot the replicated data into service. Maybe I'm misunderstanding the video but lets say you have...

The PCS is only going to show a SS that is registered to it. So in EM of the Primary SS under the Embedded Lan primary call server IP: Should have the Elan of the PCS there. Check that out. The same goes for the Alt SS, it should be pointed to the SCS elan ip and if you go in to the SCS you...

I guess I got carried away talking about my set up...:) sorry, "1) On the alternate and primary NRS gateway endpoints do I need to check NCS on both servers for both entries?" Yes you do need them both checked this is how the SS's compair notes. 2)Under routing entries to work with the 62XX...

Nikeair, The way I did mine is with both gateway endpoints(Prim SS and Alt SS) check the NCS. For the HLOC I picked an unused DN out of my list and plugged it in with LD90 under NET_DATA using AC1 with a dmi entry that doesn't add or delete anything. This number will need to be added as an NRS...