Recent content by Seattleguy

I hooked it back up to to the system and i still only get one beep and double zero's

yes a sideways 00 :) but only one beep and no boot up or musical chime.

it looks like 00. A bit weird though, instead of left to right they are sideways and up and down if that makes any sense? Question: If operating correctly will this thing boot up and play the musical chime sitting on my bench not connected any phone system? Or does the fiber cable need to be...

I am working on a Norstar Applications module NT5B74AABJ REL 07 MOD V3G fiber. With a MICS. The company lost power to the building then when the power restored the Nam did not come back. I have recycled the power several times...... it sounds like it is trying to boot up, power and fan runs...

line 003. Set it up on ext 21 ring & appear. i can answer the call from the gate F808 does not work, nor does pressing 9 to activate the gate. I'm stumped. Have been told it should work. Customer isn't happy, wants me to replace the phone system

There is no way to hook up my test set to the entry dial pad, the unit is all installed and closed up.

so the link is again someones profile, Am i supposed to ask this person? I dont understand.

The call was connected, we were talking. I pressed F808..... nothing. Then 9.... nothing.

I dont see an attached link example the only link is someones profile.

The call is connected from the call button on outside entry pad to the office phone...... feature 808 pressed u get that annoying error sound and the display says invalid code. Could F808 work on the newer MICS but not the old 6x16??

Here is what the customer sent to me: I’m wondering if it’s possible to block a room extension when a caller chooses option 6. E.g. if they choose 6 then enter 2001.Is it possible to block people connecting to room numbers from option 6? i.e. block 7+ and 2+ and 3+? Had a phishing scam which...

I installed a 6x16 and they recently has an electric gate installed. There is a dial pad for entry. On that that dial pad there is a relay I was told by the gate company to connect their in/out which i believe was the tip n ring to a CO port on the phone system. So now the visitor hits the call...

Here is another response from the carrier: You are correct in your original assumption. I stated in my email I have implemented the P Asserted ID that will allow you to send whatever caller ID you would like. The problem is when I debug the test call I your PBX is not attempting to forward the...

Here is what the Birch (c beyond) tech sent me claiming it is the Norstar programming. Is there any way the forwarding out bound has to be programmed in routes and dest codes? But what i do not understand is why a call to the main # to the menu tree option 6 goes to the Houston branch works...

The carrier says its a pbx problem. typical right.