Recent content by osgoodr

Just out of curiosity has anyone ever successfully integrated these two telephone systems together?

MiVoice 7.0 SP1 PR1

Guys, Realitvely simple question, I'm moving a selection of handsets from one controller in our garid to another. Just wondering what the best method to do it is, is there a better way of removing from one and importing on the other? Cheers

What are you trying to achieve?

Guys, I have two PRI trunks configured on a controller one has number range for example 1000-1099 abnd the other 2000-2099. What I want to achieve is send calls with 20xx out of the secondary trunk so that the correct CPN information is presented. as at the moment its currently routed out of...

Sorry, I should have elaborated a bit more. The call leg is established. the number dialed is a external conferencing system. once the call is established after a random amount of time between 1-5 minutes the call is dropped and the message is displayed on the handset. Least cost routing is...

When dialing specific numbers after a random amount of time, the below message appears on the mitel phone Any one seen this before?

Its the IT helpdesk phone, the IT guys start at 7am but the receptionist doesn't start until 7:45. So there is an overlap of 45 minutes where the 3300 remains in night service and the IT helpdesk does not ring (we dont want them to set the controller to day service because we do not want the...

Hi All, Hopefully this is an easy one, I'd like to remove a handset from being put in nightservice by our reception console. Just wondering what the best way to do this would be ? Cheers :)

Hi, I'm wondering if its possible to split an incoming E1 connection to provision it to two 3300 ICP'S One 3300 would be primary and one would be redundant I suspect the answer is no but thought I'd ask Cheers

Guys, Is it possible to connect 3300 (MXE) direct to PSTN point of presance for a FAX machine then just create a analogue trunk to route through the number ? Do I need any specific HW to achieve this? Cheers

Thanks for your reply Lou, I understand the licensing process in terms of the requirement to license a lync client is via the desktop SDK license, its just how do I assign the seats from the MAS to the UC server so I can assign the license. Feature Seats Available Seats...

Hi Lou, Thanks for the reply, I'm not sure I know where you mean can you explain in more detail please? Cheers, Rob

Hi all, Does anyone know if the Polycom VSX 5000 platform will integrate with a mitel 3300 ICP controller via SIP. Anyone have an experiance with configuring this specific hardware over SIP or any other VC to 3300 PBX integration in general? The sip peer between the two devices is up but I...

Hi Guys, I'm trying to work out how to license the Mivoice lync client on the mas so that I can deploy it within our UCA server environment. To deploy MiVoice for lync you need to have Desktop client SDK licenses available on the UCA box. I just don’t know how the MAS licensing works well...