Recent content by MrOyvind

Hi I want to renew my CCNA certification. Which books are the most updated, easy to read and most detailed ? My last book was Todd Lammel`s Cisco certified network associate from 2006-7. But there are lot of books by Lammle. Which books should I choose ? Links from Amazone will be perfect...

Thank you very much for good answer

Hi I`m certificated as CCNP and need to renew to keep the title. There is a new certification called CCNP datacenter. If I pass the CCNP datacenter certification test, will it renew my CCNP title for another 3 years, or do I need to take CCNP Route, Switch and TSHOOT ? Thank you.

Thank you.

Hi Need some free labs for testing OQS with MPLS. Any good place to download free labs ? Thanks,

Hi Want to upgrade Mac Book Pro 2012 mid year with Samsung SSD pro 840. Do it exist issues with this SSD and MAC ? Thanks, Oyvind

Forgot this info : interface Dot11Radio0.11 encapsulation dot1Q 11 native ip directed-broadcast bridge-group 11 bridge-group 11 subscriber-loop-control bridge-group 11 spanning-disabled bridge-group 11 block-unknown-source no bridge-group 11 source-learning no bridge-group 11...

This info ? sh int dot11 0.11 Dot11Radio0.11 is up, line protocol is up Hardware is 802.11G Radio, address is 001b.d4d2.2270 (bia 001b.d4d2.2270) MTU 1500 bytes, BW 54000 Kbit/sec, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation 802.1Q Virtual LAN, Vlan...

Hi, still problems with the wireless connection. CRC and Output errors occurs. sh int dot11 0 Dot11Radio0 is up, line protocol is up Hardware is 802.11G Radio, address is 001b.d4d2.2270 (bia 001b.d4d2.2270) MTU 1500 bytes, BW 54000 Kbit/sec, DLY 1000 usec, reliability 255/255...

Problems after some hours. Removed ZBFW from SVI, applied it to only BVI. So far so good.

The reason for drop, poor performance was misconfiguration of zone based firewall. It must be applied to BVI and SVI, not the dot11 interface.

Poor WLAN network performance and drops after setup with BVI and SVI, any ideas ?

Hi boot system flash flash c181x-adventerprisek9-mz.151-4.M3.bin Works Oyvind

After setting up WLAN with BVI and VLAN it works.

Can it be something wrong with the ARP configuration wireless. The host's cant resolve each other ? The cabled network configured with SVI can share files.