Recent content by mitelfang

Hi guys! When i delete a path the system response a warning?‘no matching record was found’?anybody knows how i can delete it. THX!

hi LoopyLou i did not find any other RTC address. i think this issue maybe caused by OPS,but i do not how.

hi LoopyLou the phones not re-home to local ICP,unless restart the phone.

hi dryaquaman i have checked the OPS?the secondary controller is blank.

hi guys! i have finished postgresql installation?and 5550 can connect with it.but i can't see the called number by PRI?the called number is blank?

Hi guys! In my network has three ICP composition Cluster,that managed by EM & OPS. Now all the local IP Phone automatic set its ICP1 IP address to remote office's ICP controller. So once local ICP restart,all phones will stop at waiting PIN screen. Even I set static IP,IP Phone also automatic...

i just installed UC client one time,and provisioning is no problem. but i think the sms including some message such as the number ? server IP address ... so you must use the SMS provisoned by your owen server.

hi LoopyLou i konw that. follow boycey9 's advise,i found port 80 isn't open. i think it is network problem,and i will ask custom to check it.

Make sure you can access https://provisioning.emccsoft.com/mitelws/provision.asmx

Dual NIC server and gateway mode

i check the port?port 80 isn't open. i wondering this is MSL setting or network problems?

thank you,i will check it.

i see notihing in server

UCA 2.0 client send Certificate request failed I can send Certificate request to LAN IP address,and can send it to another teleworker server. But when i send Certificate request to my custom server ?UCA client always promote me failed.

i found the problem. mitel have a new verion PKM module for 5324 set,PN 50005662. i installed module is old verion,PN 50005225. thank you,guys!