Recent content by llee1688

I have identical setup as you have with 2 kentrox routers and 3Com router on anothe branch office. After talking to Kentrox and 3Com tech support, we finally found out the problem. We are not suppose to use IP on the fly with kentrox router or some brand router because ARP table issue that...

Well Gorillamonkey, I guess you have to shell out some money to Microsoft tech support. I've try my best and good luck .....

I don't know this will help, in internet explorer option of workstation, under connection tab, make sure there is no check mark in all setting in LAN Settings button.

what happened if you just type www in URL of one of the workstation? Something telling me that your web server might be using dynamic port and your server can't translate it properly. This is only guessing but it's worth to check with your hosting company.

what happened if you just ping www (just the world "www")? Whta's the reply?

O.k...... Last resort before I'm running out of any idea. On your workstation, go to the following directory c:\winnt\system32\drivers\etc In this folder you should have hosts (no extension) and lmhosts.sam files (There should be no any other hosts or lmhost with any other extension). Open...

You might as well check this link: http://www.microsoft.com/technet/community/columns/cableguy/cg0301.mspx for more info about NAT to your web server.

Try this, on your DNS server add new Host (A) "WWW" (without the quote)with IP address to your specify external webserver. This issue is very interesting and challenging.

base on your network configuration, I assumed your server has two network card and it's running Intenet Connection Sharing. try the following link: http://support.microsoft.com/default.aspx?scid=kb;en-us;307311&sd=tech

Did you run a trace route in one of the workstation to your hosted server? You're saying that you don't have router or firewall. need more info on how do you set up your network?

Make sure your DNS IP address in all workstations pointing to your server IP Address.

If your network is Windows domain and it is PDC you need to have DNS server running because everything is integrated in active directory. Unless you want to change it to workgroup. Even you have the DNS pointing to itself, you still can go to the internet. Open your DNS Console => right click...

I have 10 workstations w/ windows XP pro and 1 Windows 2000 server w/SP4 and running in Application mode. all 10 of the stations was able to access the server using remote desktop a few months ago and now whenever the station wanted to access the server it gave error: "The remote computer...

Scenario: 3 domain controller, Domain controller a, b, and c. Try to install BE 10 to a domain controller "a" with administrator priviledge. Domain controller "a" is operational manager server. Halfway on in installation, error said unable to access the veritas backup exec directory in the...

Finally got it work with 3Com router. 3Com router I mentioned above is almost identical with linksys router except is has an option for NBX. Other than that nothing special. The configuration of the router is pretty simple and a little bit tricky when you set up a site to site VPN. it's...