Recent content by kokolatas

Hello all. I have a microsoft outlook 2010/2007 client and i have notice that there are times that the language of the text changes as i typing. ***The proofing tools are active for english and greek*** example: When i am writing a text in greek and then i switch the language in english, the...

Hm! Now i am getting somewhere... so, if i have an expansion on 6.2.11 ver and i don't know if it has been already been supply with 3.2.99 i can downgrade it without an problems... Once on a DS expansion with a 6.2.11 level, when i tried to upgrade it on 6.2.17, i got a 'time out' message...

Let's say there is brand new OUT OF THE BOX Digital Expansion Module which has been already supplied with a 4.1.xx or a 4.2.xx software level. Is it necessary to make an 3.2.99 upgrade first before the latest's firmware (eg 4.2.17) upgrade? Silly question, i know but docs advise to upgrade on...

IP 500 4.2.11 ANALOGUE ATM 16 6.2.11 There is one analog line connected on the first port of this analog module. When my customer calls outside the pbx and the call is connected at both ends, then after 11-14 seconds the call disconnects with a 'Disconnect from Destination End' Reason. I...

Yes, it is a Telco Problem after all. i don't get CLI at all on the Monitor or on the SSA programm. thanks

Hey guys, i have a problem getting the incoming call's CLI on my 16xx phones. for example, the call comes into the embedded Vm and finally rings on the Receptions 1616 Phone. There, An 'external call' shows up instead of the CLI. My local Telco informs me that he sends this Information on me but...

Hey Guys! I tried to Remotely log on into a 3.0.40 system (IPO 403) using the latest Manager, 6.2.17, and I surprised when I found that I just couldn’t getting an error “The user Administrator does not exist, do you want to log in as an Operator?’…Or something like that….Of course the...

everyday you learn something new. I use the Manager for 1 year and half and i have never been experimented before with the "Close configuration settings after send" setting And believe me, it was really annoying thing to merge every time i did something new.,so thanks..lol!

sorry but i got confused. which voicemail timer?

...thanks

Hi. just a question. Embedded give us 4 Maximum Simultaneous connections. The 5th caller will he received a busy tone or he will follow the incoming call route fallback destination?

I have a client which has 3 analog lines.The local provider didn't provide CLI on that lines so after my clients request he did enable that feature on the lines. Now, when he accepts a call, what he sees on the phones display is the Incoming CLI(eg 697xxxxxxx)+ the Incoming number(eg...

what about if someone has not a CF card? I supposed that he can use an external HTTP Server...eg hfs or AVAYA MV_IPTEL.

ok, i'm fine.the unit had the default settings and with a 2.1(44) firm so i configured it with the 6.2(14) manager. thanks guys

'someone here, on another thread, wrote that it's the 4.2(27).' sorry, 2.1(27)