Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CLI on analog lines

Status
Not open for further replies.

kokolatas

IS-IT--Management
Nov 19, 2007
162
GR
I have a client which has 3 analog lines.The local provider didn't provide CLI on that lines so after my clients request he did enable that feature on the lines.

Now, when he accepts a call, what he sees on the phones display is the Incoming CLI(eg 697xxxxxxx)+ the Incoming number(eg 2721xxxxxx).
Something like that, 697xxxxxxx2721xxxxxx.

CMSetup
Line: type=AnalogueLine 1 Call: lid=1 id=2 in=1
Called[] Type=Unknown (0) Reason=CMDRdirect SndComp Calling[697xxxxxxx2721xxxxxx] Type=Unknown Plan=ALOG Pres=Allowed (0)
BC: CMTC=Speech CMTM=Circuit CMTR=64 CMST=Default CMU1=ALaw
BChan: slot=2 chan=1
IE CMIEDeviceDetail (231) LOCALE=ell HW=8 VER=4 class=CMDeviceAlogTrunk type=0 number=1 channel=0 rx_gain=32 tx_gain=32 ep_callid=0 ipaddr=0.0.0.0 apps=0
Timed: 22/00/09 11:11
664137812mS CD: CALL: 1.2.1 BState=Idle Cut=1 Music=0.0 Aend="Line 1" (2.1) Bend="" [] (0.0) CalledNum= () CallingNum=697xxxxxxx2721xxxxxx () Internal=0 Time=9 AState=Idle
664137813mS CMCallEvt: 1.2.1 2226 Alog Trunk:1: StateChange: END=A CMCSIdle->CMCSDialInitiated
664137813mS CMTARGET: 1.2.1 2226 Alog Trunk:1: LOOKUP CALL ROUTE: type=0 called_party= sub= calling=697xxxxxxx2721xxxxxx in=1 complete=1 ses=0
664137813mS CMTARGET: INCOMING EXTERNAL CALL ROUTE
664137814mS CMTARGET: 1.2.1 2226 Alog Trunk:1: SET BESTMATCH: length 0 vs 1 match= dest=VM:AttendantKa
664137814mS CMCallEvt: PRIORITY HIKE:2226 0->1
664137814mS CMTARGET: 1.2.1 2226 Alog Trunk:1: LOOKUP INCOMING CALL ROUTE: calling party is 697xxxxxxx2721xxxxxx. Matched profile Destination VM:AttendantKa
664137815mS CMTARGET: 1.2.1 2226 Alog Trunk:1: ADD TARGET (N): number=VM:AttendantKa type=0 depth=1 nobar=1 setorig=1 ses=0
664137815mS CMTARGET: 1.2.1 2226 Alog Trunk:1: FoundKnownSystemTargets VM:AttendantKa (ses: 0)
664137815mS CMTARGET: 1.2.1 2226 Alog Trunk:1: ADD VOICEMAIL TARGET
664137816mS CMCallEvt: 0.9339.0 -1 BaseEP: NEW CMEndpoint fedbd668 TOTAL NOW=3 CALL_LIST=1
664137816mS CMTARGET: 0.9339.0 2226 RAS.0: ADD PRIMARY
664137817mS CMTARGET: 1.2.1 2226 Alog Trunk:1: ADD VOICEMAIL TARGET: SUCCEEDED
664137817mS PRN: BasicFindBestInCallRouteMatch returns(2)
664137817mS CMTARGET: 1.2.1 2226 Alog Trunk:1: INITIAL TARGETING SUCCEEDED
664137817mS CMTARGET: 1.2.1 2226 Alog Trunk:1: GetNoAnswerTimer:15




I know that probably is providers issue and that i should call him but i have to make sure that there is no other way to delete that incoming number form my incoming call route.
Any ideas?
cheers...

 
You cannot edit the incoming CLI as you already expected.
Contact the provider for this.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top