Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by IPScec

  1. IPScec

    Intramail - Mailbox Full Message

    Hello, I have an NEC DSX system with Intramail. Very small system with 3 mailboxes. This was installed a few years back and has been mostly reliable for this client. We don't work on NEC much so I am looking for help for a new problem that just started last week. The outside analog lines are...
  2. IPScec

    Display Extension Number on J129

    Thanks for the toggle information. Any idea about having the extension show as default vs the time?
  3. IPScec

    Display Extension Number on J129

    Hello, We put in some J129's this summer at three locations. One is asking to be able to toggle between the time and the extension number, or anyway to display what the extension number/user name is in the display when needed. Has anyone had any luck with this? I've only see it display the...
  4. IPScec

    SBC - Session Border Controller Comm Code 273793 Power Supply

    You are the best, thank you! I am going direct to Portwell as I can't find that commcode with our disty.
  5. IPScec

    SBC - Session Border Controller Comm Code 273793 Power Supply

    I am hoping someone may have one of these units in stock or in production and can tell me what power supply/brick it uses. We have one that a customer was no longer using but has no power supply and I need to figure out what the proper power supply is. Our disty doesn't know, and the 3...
  6. IPScec

    IPO - Phantom Ringing on Analog Lines

    Was doing more testing today after changing my lines back to ICLID from Loop Start and Ring Persistancy from 400 to 1200ms. Here are a couple logs that show the difference between a real call and a phantom call setup as they first come in. The main thing that sticks out is all phantom calls...
  7. IPScec

    IPO - Phantom Ringing on Analog Lines

    Thanks for the response Lodde, I will try that tonight and see if it makes a difference. I'm not sure if it requires a reboot, but even if it's a mergeable change I like to be able to reboot just in case. The thread I linked above has a link to this thread...
  8. IPScec

    IPO - Phantom Ringing on Analog Lines

    Hello, I just installed an IPO R9.0 with 4 analog trunks on a combo card. When a caller calls in and is answered, after hanging up, the phones start to ring again showing the callers same caller ID but they are not on the line and the person that answers just gets silence. I tested from my cell...
  9. IPScec

    Essential Edition R9.1 License with R9.0 Software

    We created a sip extn that logged in with communicator but the h323 users will not login. We would like it to be H323 so they can go between their deskphone and iPad with the same extension. Perhaps I have the wrong communicator app on this iPad?
  10. IPScec

    Essential Edition R9.1 License with R9.0 Software

    Was there anything you had to do differently on 9.1 for it to work? We have it working on their 9.0 site but can't get it on the 9.1 site.
  11. IPScec

    Essential Edition R9.1 License with R9.0 Software

    I have a customer who we installed recently onto R9.1 with an R9.1 Essential Edition License (339096) on a new system. We need to down grade them to R9.0 temporarily for testing purposes. They have 2 sites, one that is on R9.0 and working with one-X Communicator on an iPad. The site with R9.1...
  12. IPScec

    User Name Change - VM Pro Not Creating New Folder

    I cannot be the only to have experience with this issue. We have a few clients (all 8.1 and the latest release of 9.1) that have issues every time they change a user name. They have higher turn over in employee's and when someone leaves and a new person starts, they expect to be able to simply...
  13. IPScec

    IP Office & Lync Integration - Broken with Microsoft move to "Skype for business"

    Thanks for the update - frustrating when customers lose features they rely on!
  14. IPScec

    Oubound Caller ID on SIP

    Thank you all for the suggestions. I am working with the customer tomorrow to try some of these options and testing calls. I will let you all know if I am successful.
  15. IPScec

    Oubound Caller ID on SIP

    I have searched these forums and read through some of the other posts about the outbound caller id on SIP. I am not finding a resolution to my issue and I assume someone else knows how to do this. I am using SIP trunks with Fusion on IPO 8.1 with an Avaya SBC. My client is an outbound call...

Part and Inventory Search

Back
Top