Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by intelligentium

  1. intelligentium

    Names not displayed on outbound calls

    suggest to check setting DORG prompt in RLI set to YES
  2. intelligentium

    Names not displayed on outbound calls

    Is it a TIE or a DID ? If am right only TIE's would pass on the names. Would be better if you can explain the setup in more detail.
  3. intelligentium

    Hunt Groups

    I guess what you want is a call pickup group. There is both Directed pickup or group pickup. In simple the steps are, Create RNPG in the phones TNB with CLS PUA. Configure key RNP. Then toggle with DPUA, GPUA. Configure FFC's PUGR and PUGN accordingly.
  4. intelligentium

    Virtual Terminal time out on UCM with CS1000 6.0

    Hi Rufen, Not sure if this might help you. check LOUT in the PWD data block. LOUT 1-(20)-1440 Logout, Inactive Session Logout Time in minutes
  5. intelligentium

    External line forward to Nortel DN - hand off to Call Pilot mailbox issue

    Check if you have TRO enabled in the route between Remote site and Main office. If so Disable TRO in RDB and check
  6. intelligentium

    External line forward to Nortel DN - hand off to Call Pilot mailbox issue

    What is your CS release ? And your CP release and SU ?
  7. intelligentium

    EM CS1000 7.5 DANI validation error patch

    It is a general recommendation to patch through the Patching Manager. But i do it through the CLI everytime. There was an issue with CLI as curtismo said. Not sure if you can view the below https://kb.avaya.com/ext/index?page=content&id=SOLN154358&group=UG_INTERNAL
  8. intelligentium

    How to correct this error in a co-resident CPDC CS and SS.?

    If a USB is created as a bootable Compact Flash by mistake and com1 install is used on a CP DC or CP MG, and the error message appears on the COM port console.
  9. intelligentium

    CDR (not working properly)

    What about the Stat of TTY ports. Ld 37> Stat TTY. Trying disabling and enabling it. Do a dummy/blank change to the ADAN TTY data for that particular TTY.
  10. intelligentium

    EM CS1000 7.5 DANI validation error patch

    yes you may have to open a ticket with Avaya i guess. Or if you have an Avaya SSO login ID, may be you can try chatting with someone on their Live Agents on Chat, look at their support websites right top corner.
  11. intelligentium

    MC32 IPT error Log

    Guess , you can ssh to the MC32 card IP if that is possible. OAM> Ctrl+pdt PDT> 'rdopen' 'rdall' .
  12. intelligentium

    Regenerate Secure FTP Token Failes

    Can you check , if the CS is able to ping the Primary Security server from LD 117. ?
  13. intelligentium

    No voice on loop 8

    In the CFN .. Ld 17 CHG CEQU
  14. intelligentium

    I2050 version 3.0 CALL LOG / CALLER LIST

    The Application Server for the Personal Directory, Callers List, and Redial List features (IP Phones Application Server) runs on the Signaling Server. The Callers List and Redial List are call log features. 1.) enable Personal Directory service in "Node configuration" interface in Element...
  15. intelligentium

    trunk to trunk transfer enable

    XFA only for analog phones i guess
See more

Part and Inventory Search

Back
Top