Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by harrisjt

  1. harrisjt

    CM 3.1 ISO Image

    Thank you for the replay I do understand that it was pulled from Avaya's site along with a bunch of other stuff in 2018. That is the reason I had asked here hoping someone might still have the ISOs or Disks in their collection.
  2. harrisjt

    CM 3.1 ISO Image

    Hello all, I need to reinstall the CM 3.1 software on a S8300B and I am in need of the 3.1.4 or 3.1.5 ISO images. The image files I am looking for are S8x00-03.1-01.4.642.1.iso or S8x00-03.1-01.5.642.3.iso If anyone has either one of those ISOs in their files please let me know.
  3. harrisjt

    Call Pilot 5.0 for 201i

    bignose21, I sent you the FTP info.
  4. harrisjt

    Call Pilot 5.0 for 201i

    Google drive or I have a FTP server. My tek-tips user name is the same as my gmail address.
  5. harrisjt

    Call Pilot 5.0 for 201i

    bignose21, yes I have the scsi cd rom and cable.
  6. harrisjt

    Call Pilot 5.0 for 201i

    Its all good curlycord, it happens to the best of us. I will try to see if the 202 image will load on the 201 (probably wont work) I will have to try and locate a Image that will work.
  7. harrisjt

    Call Pilot 5.0 for 201i

    I had version 5 running on a NTRH30AA card (Which is what I thought is referred to as "201i") Upon looking through my Call Pilot disks I have the ones that went with a NTRH31AA card (I thought is referred to as "202i") Can the disks that came with the NTRH31AA card be used on the NTRH30AA card?
  8. harrisjt

    Call Pilot 5.0 for 201i

    I have a Call Pilot 201i V5.0 that has a failed disk. I only have the 202i image disks for release 5.0, am I able to use this image for the 201i? If not where should I look for a copy of the correct disk set?
  9. harrisjt

    BCM200 3.7 to Cisco Callmanager 6.1 via t1 pri

    Hi, I am attempting to connect a BCM to a CCM via pri with 4 digit dialing between the two and also have the bcm go through the ccm for outside dialing. i have the connections up and running however i can call from the callmanager to the BCM but only if i assign a a line to a phone/dn i still...
  10. harrisjt

    pri between IP Office 5.0 to Cisco Call Manager 7.0

    its on a IP400, i just need to have 4 digit dialing between the two and have also have the callmanger provide the outside lines
  11. harrisjt

    pri between IP Office 5.0 to Cisco Call Manager 7.0

    What is the best way to do a PRI between an IP Office and Cisco Callmanager.
  12. harrisjt

    nortel 1140e

    I just tried it and it did work. Running BCM 3.7
  13. harrisjt

    nortel 1140e

    can the 1140 be used on a BCM with 3.7 software?
  14. harrisjt

    IP Office 406V2

    TO go from ipoffice 5.0 to 6.0 what is all involved? or is it better to get a IP500v2 and run 7 let me know both ways pros or cons please i have some newer avaya IP phones donated to us and i want to be able to run them and i belive it will take 6 or better
  15. harrisjt

    BCM200 PRI/T1 Card

    whats this i read on here that the 200 can be upped to a 400 with base tray change or something? will the bcm200 support verson 5.0 or 6
See more

Part and Inventory Search

Back
Top