Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by GunsNRoses

  1. GunsNRoses

    Memory Leak

    I currently have Enterprise Manager w/ OPS Manager. I also have a spare 3300, NSU, and ASU. I don't have the resiliency kit though. Do the two 3300's that are resilient have to be on the same software level?
  2. GunsNRoses

    Memory Leak

    Hello All, I have a Mitel 3300 ICP with version 8.0.7.16_2 software. This software clearly has a memory leak. I received the alarm below from the controller. This is an alarm that I also received back in January. The "fix" both times was a reboot. Unfortunately, we have a 24/7 facility...
  3. GunsNRoses

    RAID Controller Error

    You got that right!
  4. GunsNRoses

    RAID Controller Error

    The mirroring was successful. gnr
  5. GunsNRoses

    RAID Controller Error

    it will load to a similar point to the above but will clear the drive sockets" Thanks james1982. The THB actually says to refer to Knowledge Base Article 06-2806-00012 to clear the sockets, but I couldn't find that article anywhere and didn't even know what it meant. Thanks for clearing that...
  6. GunsNRoses

    RAID Controller Error

    That did it. Thanks Paterson!
  7. GunsNRoses

    RAID Controller Error

    Hey Guys, We just purchased a 3300 MXe with a RAID controller, redundant hard drives, and version 9.0.0.8 software. I've been trying to setup the redundant drives, without success. First, I power up the 3300 with only one drive and no RAID controller. It comes up and I am able to login to...
  8. GunsNRoses

    Off-hook 911

    I appreciate all the input, but I stated in my original post that I too think this is a bad idea. After kwb gave me the how to, I thought about ringing the night guard instead of 911. The ultimate deciscion won't be mine. I'll only be able to make a recommendation.
  9. GunsNRoses

    Off-hook 911

    Thanks kwb.
  10. GunsNRoses

    Off-hook 911

    Hello, I have a 3300 ICP with release 8.0.7.16_2. I have been asked to setup a few phone boothes thoughout our facility. They want the phones inside the boothes to automatically dial 911 when the phone goes off-hook. While I think this is a bad idea, I need to know if/how it can be done and...
  11. GunsNRoses

    Transfering caller directly to a VM Box 3300icp

    Or you could hit the transfer/conference button, then the voicemail pilot number, followed by the # key and the extension number. If this is a 5500 console, you can program a button on the console to enter the voicemail pilot number and the # key for you.
  12. GunsNRoses

    5550 Consoles keep dropping off network

    Is the 5550 console network connection jumpered off the console PC, or is it connected to it's own switch port? I had the same problem when my console was plugged into the console PC. If you have a spare port, plug the console in there instead. Just make sure the spare port is on the same...
  13. GunsNRoses

    Wrong Time Stamp When Forwarding VM to E-mail

    So, when I create the record in the NVM form, will it not have any negative effects on my embedded voicemail?
  14. GunsNRoses

    Wrong Time Stamp When Forwarding VM to E-mail

    Hello, I have a Mitel 3300 ICP LX using embedded voicemail. We are using the forward voicemail to e-mail feature. The problem is the time stamp is wrong on the e-mails. I checked the logs on the controller and found the following two errors: Source: VPIM Description: SCMTPClientMsg...

Part and Inventory Search

Back
Top