Hello all, I have a couple of 5550IP consoles (on a 3300, 8.0.10.7_1) that keep losing connection with the network. The customer has only just noticed it happening but on checking the maintenance logs it appears its been happening since day 1 of install. The logs generated are 'warning' logs which say: "The set is out of service due to loss of communication."
The customer has no DHCP server & all PC's are statically assigned ip addresses. The phones are also all assigned static ip addresses by entering the relevant info when the phone boots up. DHCP is enabled on the 3300 but there isn't an ip address range, it was only switched on so static ip addresses could be programmed for the consoles. Anyone got any ideas?
As usual all help is greatly appreciated!
Cheers
The customer has no DHCP server & all PC's are statically assigned ip addresses. The phones are also all assigned static ip addresses by entering the relevant info when the phone boots up. DHCP is enabled on the 3300 but there isn't an ip address range, it was only switched on so static ip addresses could be programmed for the consoles. Anyone got any ideas?
As usual all help is greatly appreciated!
Cheers