Recent content by fh497a

does anyone else have any experience with 7.5? Our current release 5 has been very stable and I am happy with it.

Vendor is giving us a push to upgrade to 7.5 and all our 15 SRG sites.

we are running callpilot version 5 .. is there a way for the customer to enter in the extension without having to go into the dial by number menu block on an auto attendant? I call alot of companies " if you know your parties extension enter it at anytime" ..

for the interim is it possible to schedule a reboot/reload of the switch every couple of months?

I could try doing that as well.... I do have the budget to replace the switch . then that way I can atleast have a full physical backup.

Hello, This is for our core switch at our HQ location. Small to medium traffic servicing 600 users through 15 branches. 100 users at this site. Fileserver traffic VOIP Sharepoint SQL Oracle 30 servers Current switch 5+ years old looking to upgrade and looking for...

or something like the below with 48port modules http://www.router-switch.com/ws-c6506e-s32-10ge-p-561.html what is the main difference between these 2 switches? Just looking for something that meets our needs. We have about 100 users and this branch contains all the core infrastructure for...

We are looking to get a new switch and this is what we currently have cisco 4506 Sup II+10GE 10GE (X2), 1000BaseX (SFP) WS-X4013+10GE JAE10328ME7 and 5 of these 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE1115C3GE I want an update to this but enough for the 5x48 ports...

Bladecenter servers are distributed between two vlans. I've already changed the physical cabling and ports. Will try upgrading the IOS on both sides

yes im showing input errors on the physical ports. Will need to review the load balancing algorithms. But we are using this for (if you can recommend an algorithm) esx and physical servers that host sql, sharepoint, fileserver, webservers .... Will the below have any effect on anything...

the errors continue to grow daily .. I had 37 errors after tranferring a 600mb file to the server. which command do you suggest? active Enable LACP unconditionally auto Enable PAgP only if a PAgP device is detected desirable Enable PAgP unconditionally on Enable...

i did remove the error by assiging the same VTP domain .. but stil getting input errors.

looking at the table im seeing a handful of: Are those all switches or could be uplink ports to routers/firewalls/AP's 4 0019.2f86.0abf static ip,ipx,assigned,other Switch We have a few small switches 4-6 port ones around the building. Could this be part of the issue?

Ya .. I wish I had time to troubeshoot but it usually happens during the day and is our backbone switch to our network. The switch is 6 years old and management is suggesting why not just replace it .. but not sure now if that would even resolve the issue.

When I do the above. I only see the ip address and physical address of my gateway vlan that is on the switch. Should that be the physical address I should be writing down? I don't see the ip address of the switch listed in the arp table.