we are running callpilot version 5 .. is there a way for the customer to enter in the extension without having to go into the dial by number menu block on an auto attendant?
I call alot of companies " if you know your parties extension enter it at anytime" ..
Hello,
This is for our core switch at our HQ location. Small to medium traffic servicing 600 users through 15 branches. 100 users at this site.
Fileserver traffic
VOIP
Sharepoint
SQL
Oracle
30 servers
Current switch 5+ years old looking to upgrade and looking for...
or something like the below with 48port modules
http://www.router-switch.com/ws-c6506e-s32-10ge-p-561.html
what is the main difference between these 2 switches?
Just looking for something that meets our needs. We have about 100 users and this branch contains all the core infrastructure for...
We are looking to get a new switch and this is what we currently have
cisco 4506
Sup II+10GE 10GE (X2), 1000BaseX (SFP) WS-X4013+10GE JAE10328ME7
and 5 of these 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE1115C3GE
I want an update to this but enough for the 5x48 ports...
yes im showing input errors on the physical ports. Will need to review the load balancing algorithms.
But we are using this for (if you can recommend an algorithm)
esx and physical servers that host sql, sharepoint, fileserver, webservers ....
Will the below have any effect on anything...
the errors continue to grow daily .. I had 37 errors after tranferring a 600mb file to the server.
which command do you suggest?
active Enable LACP unconditionally
auto Enable PAgP only if a PAgP device is detected
desirable Enable PAgP unconditionally
on Enable...
looking at the table im seeing a handful of:
Are those all switches or could be uplink ports to routers/firewalls/AP's
4 0019.2f86.0abf static ip,ipx,assigned,other Switch
We have a few small switches 4-6 port ones around the building. Could this be part of the issue?
Ya .. I wish I had time to troubeshoot but it usually happens during the day and is our backbone switch to our network.
The switch is 6 years old and management is suggesting why not just replace it .. but not sure now if that would even resolve the issue.
When I do the above. I only see the ip address and physical address of my gateway vlan that is on the switch. Should that be the physical address I should be writing down? I don't see the ip address of the switch listed in the arp table.
just to be clear.
Everyone connected to this switch 150 user's cannot ping anything. Also devices from other location were not able to ping anything on this switch either.
going through log shows im seeing the below. The bladecenter vtp status is set to transparent. Could this be causing the issues?
2. If I do change the bladecenter vtp client to server will this cause any loops?
*Jan 31 05:06:38 PST: %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation...
hello,
connecting from a cisco 4506 to a cisco switch on a bladecenter hs21. The delay is set to 10usec on all ports and port channels.
here is the config on the 4506
interface Port-channel2
description BLADECENTER SW2
switchport
switchport trunk encapsulation dot1q
switchport trunk...
Hi all,
This has been happening once every 6-8 months.
What happens is I cannot ping anything on the switch (local gateway, other computers, routers, servers). I have to power cycle the switch to restore service.
Any suggestions .. I did upgrade the IOS a while back but it didn't help the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.