Recent content by f3liC

Sorry the cards are a combo, phone2 and vcn.

Backstory: We purchased this unit in November or so. We upgraded IPO to 9.1.5 with the cards being recognized without any issues (FXO/FXS all there). However, we were trying to do a SIP configuration through a voice gateway for SIP carrier services. After a lot of testing, we decided to...

Nevermind. Found the answer. Taken from the SV9100's manual. Good enough for me! Note that the GCD-CP10 blade must always have a static IP address. This address is set in Program 10-12-01 : GCD-CP10 Network Setup – IP Address (default: 192.168.0.10).

Hey guys. Got a weird question here. Customer is requesting the PBX and VM's IP to grab an IP from their DHCP server through MAC filtering instead of statically assigning the IPs of these two interfaces. I don't remember ever seeing an option for this. Can someone tell me if this is possible or not?

Found an older thread where it states SIP prefix/analog prefix/PRI prefix is used in the same way so I'm going to assume that what I have in the first post is correct

After some digging, I was able to find some definitions from the help menu for SIP prefixes However, the definition under analog lines for prefixes is somewhat different. I wonder if functionality is the same. If anything, I'd have to do a live test to confirm...

Hey guys. I'm looking to add prefixes to one of our PBX's for redialing through call history. Usually on the POTS line on IPO, we would just put "91" (9 being the access code to dial outwards) and call it a day. However, under SIP lines, there are three different prefixes ("Prefix", "National...

Looks like we're still having echoing issues with both options set to off. Impedance test when not checked on automatic still puts us at 600 (duh, US default). Other than that I don't see why its still echoing. I got a few traces of echoing and we'll send that towards Avaya and see what they...

Thanks for the SS. I'll try to turn off echoing options and monitor some more

Is there no impedance matching tool other than manually setting the options?

I read that there was a tool for this under manager but google doesn't bring up any information....

Hey guys. Hoping that some of you may have seen this problem before. We've deployed quite a number of IPO 500s now (all 9.0 and up, mostly using 9608 handsets). All our customers who are using SIP or PRI seem to have no issues what so ever but a lot of our customers have issues with POTs...

Thanks for the document! That was exactly the information I was looking for. We were able to implement vlan tagging correctly.

I'm trying to configure these phone sets to work off of one rj45 jack. I have the following: Assuming vlan 11 for data and vlan 17 for voice Using astericks + freepbx HP Switch with vlan 11 untagged (native) and vlan 17 tagged windows dhcp server for both voice and data I am looking for a...

Right and that is how i have configured it. ICR goes straight to that group when the particular number is dialed. So far, under the configuration with fallback, it SHOULD work in such that when out of hours, calls go directly to VM. No overflow just bare configuration as I have stated and...